Decoding disc My Lexar Flash drive wont open on computer

you can remove the right protection from the computer you use to create the right protection, if you want to use diferend computer that's impossible but same you can go to start and type CMD the comand prompt once the (CMD) folder will open, type (discpart) another (CMD) folder will open type list disc that is going to highlight all the disc on your computer or laptop, now type select disc and exact number of the flash drive if it's 1 2 or3 and hit enter it will select exact number with the flash drive, now attribute clear readonly and enter, now it will says attribute successfully, now type exit to see changes remove the flash drive and plug it back done

The thumb drive you have came already formatted and ready to use. It will read as a DISK because it works the same as a CD or DVD disc. A formatted flash drive is set up at the factory and ready to be used by the new owner. Just copy what you want to move from the computer to the flash drive. When you want to remove data from the flash drive, simply DELETE doing the same as you would on your computer PC or Laptop.

Just plug the flash drive into a USB port on a computer, the computer will see the flash drive as a drive, windows will usually open autoplay, and ask if you want to open the folders.

If not just go to my computer, and you should see the drive listed under your C: drive.

Make sure you move the arrow( thumb slide) on the flash drive so the port sticks out so you can plug it in.

you will need to connect your lexar to your computer

click start click on my computer to open from there you should see your lexar then right click to select open you should see

the data / photo's in there select what you want to delete right click select delete or you can right click select format this will delete all data on hard disk

hope this helps

Some computers will not support a large 8GB stick. The best some will do is 2GB, If you are running a computer pre-2001, you may not be able to use the 8GB stick (I have the same problem with my desktop PC). It just is not supported!

if you have moved everything off it, just right click and choose format.
You can do this from my computer, or disc managment (right click my computer/manage/disc managment)

Scan you pendrive for Virus from another computer who has effective antivirus program & it have latest Update.

Norton is my trusted.

Thanks.

I suggest formatting the card using the utility in the camera. This will delete any data that is currently on the card.

Hello,
This device should be plugged into any computer that has USB ports to plug into. Usually, you plug it in and you will see something pop up in the bottom right corner of the screen about installing usb drive. When it is done installing (usually takes about 1 minute), you can open My Computer and see it in there as a removable drive. Open it and save your files directly in there by copy and paste or drag and drop.

Thanks,
Lolita

You just need to connect the Lexar 1Hb to the USB port on your computer and let the computer recognize it and then after that double click Mycomputer and you should see there the Lexar , just double click on it and now you can copy and paste music from your computer to the Lexar...