Frimeware when i upgrade frimeware router stops working...

try changing the 2.4ghz wireless channel to 1 or 11

Upgrading the router firmware wiped out the settings. Put the settings back. You will need to find out what they were. You will need the PS3 instructions and the router instructions, then read both.

Try to upgrade the firmware of the router. Firmware is the software of the router.
Download the latest firmware of the router. Go to the manufacturer's web site and download the firmware of the router.
Open the set up page of the router and upgrade the firmware of the router. Once you upgrade the firmware of the router, reset the router.
On the router you will find a small reset button, hold it down for 30 seconds. release it. wait for 1 minute. Now unplug the power to the router and plug it back in.
Now you will need to reconfigure the router according to the Internet service provider.

WRT160N router has issues with firmware. Upgrade the firmware of the router.
Download the new firmware from the web site www.linksys.com/download . save it on your computer. open the set up page of the router.
Upgrade the firmware of the router. Once you upgrade the firmware , reset the router for 30 seconds. Release the reset after 30 seconds. wait for 1 minute. unplug the power and plug it back in. wait for 1 minute.
Now you will need to reconfigure the router.

Click here for more information

The problem here is with the Linksys router that you have, what you can do here is to reset and reconfigure the router . To reset it press and hold the reset button of the router for 10 seconds using a pen or a paper clip while power is ON and then after that power off the router for 10 seconds and then run the setup CD to reconfigure it back....

It works and then stops. I think you will need to upgrade the firmware of the router.
Download the firmware of the router from the manufacturer's web site.
Open the router set up and upgrade the firmware of the router.

Once you upgrade the firmware then reset the router for 30 seconds. unplug the power and plug it back in.
Reconfigure the router.

Click Here for more info on how to upgrade the router firmware.

here is the Creative website support page where you can download the firmware and install it.
http://support.creative.com/Products/product_list.aspx?catID=213&CatName=MP3+Players#

Good Luck

Try to upgrade the firmware of the router.Download firmware file from http://www.linksysbycisco.com/US/en/support for your model and open 192.168.1.1 Leave username blank and in password type admin click on administration and then on firmware upgrade.Browse and select the downloaded file and upgrade the firmware.It will surely work.Enjoy!!

I would start by upgrading the firmware on the router... even if its the same version just do it again something in the software could be corrupt. Now make sure your getting the firmware for the exact router model #. After upgrade before you plug the router in reset the modem... then re-run the wireless network wizard. Do all of this and let me know if your wireless works now and we'll move to the next step.

Go into your routers settings, usually by typing it's ip address in your web browser and save all the settings to your hard drive or make a note of all the settings. Look to the connections menu and see if your ISP's ip address and dns servers are showing and not showing noughts, if it does show noughts your isp is at fault, if there is dns server numbers showing,look to see if there is an option to restart the router, if restart it and try again. On the router normally at the rear there should be a hard reset button which should be held in for atleast 10 seconds and let the router reboot. If non of this works, then the router is probably faulty