Please insert disk into removable disk

It is not formatted.
Go to Control Panel, select Administrative Tools, then Computer Management.
Select Disc Management and follow the prompts to format the USB drive.

4 GB pen drive show property as 0 byte used and 0 byte free..when subjected to open show insert disk please help!

Try the following link for a utility to help you out.
http://www.freedownloadscenter.com/live/how-to-format-transcend-pen-drive/drive.html

Plug it into another usb socket and you should find it works, Sometimes usb sockets and drives can become corrup.. by right when you reboot you machine it will revert back to normal

Hello there yogeshpat876.

Here's your geek-steer ...

Is this a new drive? If so, it probably just needs to be formatted [and optionally assigned to whatever free drive (letter) you desire]:

Start > Run... > tpye "diskmgmt.msc" (without quotes), then OK

Good luck, and please do post back ...

• to let me (and interested others) know how things worked out,
• to provide clarification or feedback,
• if you have ANY further questions.

Today's the best day of my life ... and NOW you're part of it!
Via-con-Dios and Godspeed -- Geekinator (aka Craig).

My usb was suddenly says used capacity 0 bytes,free 0 bytes,FILE SYSTEM raw.Cannot be formated.it says insert flash drive.give me the best solution

I would first put it through a fast formatte then a standard formatte, then i would recommend asector scan and see if there are any sectors that are not recoverable, if they are messed up and or still not solved try to uninstall the file that has stored the recognition files for the pen drive remove the main file in c drive program files , find the file by name corresponding to what it is you have and delet it then do a full shutdown and after a full cold start reboot install pen and software when asked if you still experience this post the results and i will try to help in a higher level of tech knowledge and support

1. Download this tool:
http://dl.dropbox.com/u/4040651/LLFTOOL.EXE

2. Format

(WARNING: After running this low level format tool,
the whole USB flash disk surface will be fully erased.
Therefore, data restoration will be impossible after using this utility!)

opening pen drive, it shows 'please insert the disk' & it shows 0 bytes & while trying to format it shows the same message again , i am using 2 gb pendrive of trancend.

First u should format disk from disk management mmc snap or from command prompt.without formatting a disk's properties says 0 bytes used and 0 bytes free space.