My wps light on my talktalk router won't stay on

If your printer has the wifi blue symbol on control panel, press that and notice the list of different choices.
The easiest is "WPS", but this means your router must have a "WPS" switch.
if it does then the rest is easy.
On your printer begin again press WIFI button.
scroll until WPS is available, PRESS "WPS".
instructions should appear to press ,on your router, the WPS button (i hold this button for two seconds then release)
return to your printer, panel after awhile should say connected.
to test find email then on your device select print, the Brother printer name should appear. Select then print.
Later even if your printer goes to sleep it will awaken on the print command , a little slower, and complete print request.

WPS is a switch on your router that is pressed in order to tell the router to look for devices to connect to wireless. I'm assuming you have a router that will connect your ipad and printer to a local network.

where is the WPS button? - Canon Community

community.usa.canon.com/t5/Printer...Support/...WPS-button/td.../8893

Dec 27, 2012 - It asks for me to push the WPS button, but can't find? ... Now I am afraid to unplug the printer and move it back to my desk because it will ... starting only 2 days back, it was daily "dropping" my wifi connection with my MacBook.

WPS access point - Canon Community

community.usa.canon.com/t5/Wireless.../What...WPS.../11819

Jan 19, 2013 - What and where is the "WPS access point" button required to set up wififor the ... What and where is the "WPS access point" reqired to use wifi for the MX432printer .... My WPS button is on my the back of my router (blue button) ... I have a tp-link model tl-wr841n and I can't find the access point in the router ...

Connecting your HP wireless printer ' Wireless Printing ...

WPS only works with client Wi-Fi devices that have a WPS button.
Your router does not have it, so it does not work.

If your wireless router was setup using the default configuration, the password, also called a security key should be on the bottom of the router. Alternatively you should be able to specify on your ipad that you want to connect using WPS, and your router will have a WPS button on it. Pushing it for 2-3 seconds would allow your ipad to connect without needing the password. You should be able to google "connecting ipad to wifi using WPS" and if necessary include your router model to get specifics about the location of the WPS button on your router.

May be a user name specific to Apple. Do you have an Apple id and have you tried it to see it it allows your email to work. Gmail is a trhird party independently run email server. Try this if you have an Apple id, if not create an Apple id and try it. Hope this helps.

Go to the linksys website, see if they have a firmware flash for the router, that may help in some connectivity issues. You may also find that the ipad/iphone may drop connections when battery levels are low

there were some random wifi issues with ipads early on but the most recent updates through itunes have corrected those. So best thing would be to connect to your computer and make sure its updated. if that doesn't work, may be a range issue, they dont have the longest reception.

A wireless client has to support WPS ( wi-fi protected service) function in order to use to add the client to your WPS enabled Wireless Router. check the iphone user manual of your wireless client to see whether it supports the WPS function. If your wireless client does not support the WPS function, you have to configure your wireless client manually so it has the same SSID and wireless security settings, you could also go into the advanced wireless settings and enable WPS ( push and connect ) if your router has this option this is sort of specifically for things like mobile/cellular phones and ipods...hope this helps please vote thanks