20 Most Recent Krups KM7000 10 cup Grind and Brew coffee maker with conical burr - Page 7 Questions & Answers

www.youtube.com/watch?v=3hqZKm4mH2k You may just need to clean it out. Watch videos.

You need to try much harder to contact them or alternatively return it to the retailer and let it be their problem. Messing about with it yourself can risk voiding the warranty.

Krups do not supply a service manual for this model so you are only going to get information from others who have done repairs on them. The service info only refers to a leak at the pump high pressure exit elbow (you replace it and the high pressure tube) and an overflow leak at the top of the brewing handle (you replace the inner plastic guts of the handle with improved part) The rest is follow your nose to find faults and solutions. You may be better to post your specific problem. I only ever worked on the more expensive models with integrated grinders.

That's probably going to be a big job, Error 10 means that the sensors are not detecting any heating of the boiler. Good luck with that one.

Prosz? o pomoc...mam krupsa EA9000 i wy?wietla mi code:4 , nie wiem jak si? do niego dosta? do ?rodka

I had the same problem with a 8250. I had to throw it out as the grinder stopped accepting oily beans. I suggest that you take all the beans out and take a "keyboard cleaner air can" and spray the heck out of the area where the beans get ground up. It'll spray grounds all over so do it outside!

You should not need to "prime" the pump as gravity takes care of it. Check the opening on the water tank to see if in time it has closed up. Check for debris where the tank connects to the unit. If it has a filter, take out the filter and try again.

I had a 8250 model. I had to also open mine up. You need to remove the plastic cover - it is "snapped into place around the edges". then you can see the screws for the mechanics inside, you may see where it is leaking just by popping off the plastic cover. I had a connection come off and added a new spring clip to close up the tube that was leaking.

I have ea8250 krups machine . It gives me error code 05

If the people in SA are authorised service agents they may need to contact the technical dept at Groupe SEB SA to get the info. It's not available online through the normal service centre channels.

Are you sure that's the correct model number, it doesn't exist anywhere in the service data I have access to.

If the cold water pumps from the bottom of the unit, you may have a problem with the one-way valve. Normally, this valve opens when the water is hot enough to pump up to the coffee basket, but closes to prevent the hot water from flowing back into the reservoir. If this valve is sticking, that could produce the symptoms you describe. Without actually seeing this unit, I don't know whether the valve itself can be replaced. This may require replacing the whole machine.

It seems like it must be detecting an error of some sort. Maybe the boiler is not heating, maybe the pump is not pumping, only testing will reveal the cause.

Probably providing more info that includes the model number will help someone to help you. Have you any idea how many coffeemaker models Krups have made?