20 Most Recent
Proscan 42LA30H 42 in. LCD Television - Page 3 Questions & Answers
Have 40 inch Proscan TV. Am trying to program my
You mostly have to go through all the numbers to find one that works. Sometimes, with an off brand TV I have the best plasma i've ever owned right now. It's not a fancy brand name and the remote ( Comcast ) wont work for it. The comcast guy said that it would not work with my TV. Hope ite helps. You may not be able to pair the two at all.
I have a Proscan 42LA30H LCD TV. Get sound w/blue screen
Hi,
Blue screen usually means there is no video signal present.
First, check the input cables and the settings to make sure you are setup correctly... double check it.
Secondly, do a hard reset by unplugging the mains and let it sit idle
with no power for at least one hour. Then, power it up again and go
through all the setup steps.
If it still fails you should have it examined by a service tech. It could be something not so expensive to repair.
(I am guessing it to be related either to a power supply regulator or the video processing.)
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
My proscan is buzzing and pix is flickering when the power is on.
I found this solution on another review, hope it works
Model Number: Proscan 26" LCD HDTV w/ Built-in DVD Player26LB30QD
"pro: good price, TV picture is clear and DVD player is compatible well.
con: sound noise
There was hum when I first turned the TV on, then I followed these instructions (found it from other review) to fix the hum issue:
1. Turn tv on
2. Input mode should be tv
3. Turn volume to zero
4. With remote enter 9 8 7 6
5. A menu will appear on left side
6. Arrow down to backlight and with right arrow key move number from 81 to 83, press menu button twice,
7. Turn up volume and listen if hum is gone."
It works,no hum."
No sound
Did you accidentally hit the mute button on the remote
Codes for remote
I only have a solution for the directv remote codes use the LG TV code 10056.
3 light x-lines across TV screen
From elsewhere on the web:
"Proscan used to be the RCA high-end trademark; RCA (at least the TVs) was purchased by Thomson; they leased the proscan name to a Korean outfit that has the TVs made in China.
I've never owned a Proscan (post RCA)... but the internet buzz is that they are of inferior quality and that it's virtually impossible to get support in the USA.
I would qualify that: Costco is selling Proscan TVs; they extend the warranty by one year (to two years); and if you have a problem, ya got Costco behind you.
So I guess unless you buy one at Costco, you should pass"
Perhaps you need to contact the entity at which you purchased the television.
I am trying to hook my DVD player up to it and it
There are many ways to hook up a dvd player to a tv! Audio/video cables, s-video, and component.
Second you need to make sure the tv has the correct source selected. your tv will say on the back which number source you plugged your dvd into. make sure these are the same!!
42 inch proscan lcd
If you use the connections for DVD you must use all of them.If you are using the standard yellow,white,and red connectors connect them to the connections listed as video and not the DVD titled connectors. But my advise is get an up converting DVD player and use a HDMI cable to get the best picture with out having to brake the bank buying a Blue Ray. I once connected a DVD player to my TV in the same fashion before finding out it only gives you a purplish black and white picture. Up converting DVD players can be bought around 30 dollars and up. A 6 ft HDMI cable will cost around 15 dollars. This way you will be getting the full effect and great picture your TV can produce.
Green
Hi, This is common if you are watching something in hdmi. You'll need a better cable to get rid of it. Please rate my answer. I hope this helps!
Hooking up XBOX 360
Hi have you tried going into the menu option using the telly controll and switching the hd mode on this should then allow you to use the xbox through hdmi cable
Not finding what you are looking for?