20 Most Recent Krups Burr Coffee Grinder - Page 5 Questions & Answers

Error 12 There was no pulse from the ejection switch so possibly a switch problem or worse still some grief on the control PCB. This will also be associated with the cleaning the drawer problem. From memory the switch/es are located above the used grounds bin.

my dear sir it looks that you had some internal leaking .due to this the water went on to the electric parts . now you need to fest dry it properly then plug it in again and make sure it doesn't leak again if not check there is two thermal fuse on the ac supply sow make sure you unplug first see that you do the same as type if this get blown again then you have to change the pcb

Hello, Roos - You may find the instructions here helpful: https://www.thespruceeats.com/how-to-make-yogurt-in-an-electric-yogurt-maker-909013 Best wishes.

Running it fully through the cleaning cycle step by step will normally get it gone.

what type of krups do you own model thanks

Did you try the Krups web site for the manual? First place I'd go.

I think you will find it here: http://safe-manuals.com/brand/krups

http://www.fixya.com/support/t9196987-need_manual

Look for a red re-set button. If it has one push it in. If no re set button it likely is dead. Make sure power outlet is working first.

https://www.boulangerhttps://www.boulanger.com/ecommerce/notices/4/3700342411294_n_0.pdf.com/ecommerce/notices/4/3700342411294

It is your device you can do anything you want to. The question is should I and the answer is no.

You can try to put in a small bleeding resistor to push away the 30 Volts. However, this is not a proper solution. Check where the 30 volts have it's origin. If you spot a false connection somewhere, fix this.

Please contact krups for this error code. They refuse to give answers about how and what without the right code and machine number.

Sounds exactly like a heavy case of calcium buildup. Most likely you need to flush the machine with vinegar for a lot of times (10x) and use proper cleaning methods to clean it up by hand. However, i think it's faster to bring it to a repair service and pay 100 dollars.