20 Most Recent Belkin (F5D8231-4) Wireless Router (F5D82314) - Page 7 Questions & Answers

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

The key that it is asking for is the key for the wireless network.

If this has not been changed from the manufacturer or ISP that you got the router from, you can usually find the key on the bottom of the router, or in a sticker in the box that the router came in. It will say something like 'wireless key' or 'WPA key' or similar.

If you cannot find the key, and the router came from your Internet Provider, it may be worth giving them a call and seeing if they have a record of the key.

Hope that this helps!

Hi Clark,

I got your issue, Inorder to enable the security on your belkin router

1. Open Internet explorer and in the address bar type 192.168.2.1 and hit enter
2. You will be logged into the belkin router setup,it will ask for login password, leave it blank and click on submit
3. In the left side Under WIRELESS , click on SECURITY
4. If the security mode says disabled, click on drop down arrow and select 64 bit WEP and it will show up KEY1, in key 1 type any ten digit number (2nos in each box) and apply changes

From now your network is secured with WEP security.

Thanks & Regards,
Prema.

have to buy a new cable set it up and do not have the DVD download it at dell.com

Turn everything off.Unplug all the devices connected to the router . With the router powered up hit the reset button on the back of it .The router should flash an reset.Go in as admin into the router after you plug everything in an do settings.

Try here --->link.

there is nothing like changing the NAT , but yes you will get rid of this message on you PS3 or XBOX once you open the ports on you belkin router .

* TCP 80
* UDP 88
* UDP 3074
* TCP 3074
* UDP 53
* TCP 53

turn off the firewall , enable upnp and assing a static ip address on your gaming device

You are trying to open the NAT on the router.
For this you will need to reduce the MTU settings on the router to 1365. Disable the UPnP on the router.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.
Router set up page is the page where you can change the settings of the router

Click Here to know more about router and network

have you tried the same cable in all 4 ports?
If it works in all the ports, plug the other cables in and reboot everything. PC,s modem and router.
You may be getting ip address conflict, rebooting should cure it.
If the same cable just works in 1 port, the router is broken

I think the power cable of your modem has been damaged. kindly check the power cable. If there is no light on the modem , it is assumed to be that the power cable has been damaged. so you have to purchase the power cable of the modem. If the power cable is found to be perfect , kindly purchase the net work cables/ OR prepare the net work cables if you are aware of about the network cables., because the clippings of the network cables might have spoiled. If the power cable of modem, network cables are found to be perfect , it is certainly , the modem might have damaged. To fix the all the problems mentioned above , you are requested to to contact your ISP ( Internet Service Provider) . They will certainly fix your problems. In the mean while kindly try to solve yourself. If you are paying rent towards the monthly charges against the modem to ISP , they must be replace your modem with new one. If you have purchased the modem by paying the cost of the modem at the time of installation of the internet connection , you have to purchase the new modem, if the old modem was found to be damaged.

Here is a direct link to the Forum http://www.dslreports.com/forum/r19257537-Help-Belkin-F5D82334-and-NAT-setting-with-Xbox-Live-360 Let us know if it worked Have a good day

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know


==============================================
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


====================================================================

You Will Have to contact your internet Service and ask them to bridge the modem

And then Call belkin (1800-223-5546) and they will help you in setting up the connection

1.Log into router. Using either 192.168.0.1 to 192.168.1.1 in a browser window that is ( internet Explorer or Firefox)
2. Verify wireless router name( on the computer) >>> ( on/off) ( router status window)
3.Note router name you are connecting to.
4.. Check the laptop/desktop do ipconfig /all to see current IP addresses.
5. Set the laptop up in the router by WEP KEY or MAC address. This set up in the "security tab" in the router. using 192.168.0.1 or 192.168.1.1 to access through a browser.
6.Note router name you are connecting to.
7. Move the laptop about 20ft away and try to log on to the internet.
This is for all routers to set up wirelessly.
8. check for firmware update at the manufacturers site for your model router
9. cell phones, cordless phones, digital TV's, can affect the data signal from a router. Also distance from the router can be a factor. If your router is in a basement place the router to a upper floor and center it in the room.

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

http://192.168.2.1

If it is not working

Click start - > programs -> Accessories -> Command prompt

And type ipconfig

Check the Default Gateway (XP) or IPv4 Default Gateway (Vista/Win 7)

type that in the Url

You need to open the router setting page and open all the port by checking the DMZ active

>You must be looking for the Default Gateway that leads to Belkin's configuration page.
>It's 192.168.2.1

>comments suggestions ratings and violent reactions will greatly be appreciated thank you...

You need to configure the router manually because teh CD wont work properly.
>Open Internet Explorer and in the address bar type 192.168.2.1.
>You will be in the router setup page.
>Check if the internet status is connected on the right hanh side of the screen is yes continue with the following steps.
Step 1: Select channel and SSID and changed the channel to 11 and changed the SSID to a 8 or more letter work without space or special characters and then click on apply changes.
Step 2 :Then select Wi-Fi protect setup and changed it to disable and click on apply changes.
Step 3 :Then select security and changed it to WPA/WPA2 type and entere a password in password (PSK)/Pre-Shared key (PSK) box with not less than 8 characters--(Its case sensitive) and then click on apply changes
Step 4 :Try to connect wireless on the laptops and enter the security key that you enabled and click on connnect.
Step 5 :You will get a message "Connected' and you will be able to go online If not give Belkin a call 1800-223-5546