20 Most Recent Belkin (F5D8231-4) Wireless Router (F5D82314) - Page 6 Questions & Answers

192.168.1.1 than log in and you should be able to change it from there

Can you tell me how you do to surf YouTube through DVD?

First thing to try is making sure you have the latest firmware on the router. If you have not logged into it before you need to type http://192.168.2.1 in your browser address bar and log in when prompted. The router by default does not have a password set so it might be worth setting one in system settings. You should find on the menu an option to update the firmware. Read the screen should guide you how do this. If the firmware is up-to-date and you still have a problem try disabling your firewall on the pc to see if it's getting in the way. Don't leave the firewall off if you find it's causing the problem you just have to work out how to configure it to allow the traffic out. The route should allow this traffic out by default.

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

log into the router, go tothe wireless - security section and the should be an option to show the key if it is not visible.

You don't need an installation cd for set up your router. All you have to do is to log in with your browser at the router's page and make all settings you wish. In case you don't know the router's page (his own i.p. adress) make this simple trick:
Connect your computer with ethernet cable atthe router and after the connection has been established, hit start - run -type cmd. At the new black window type ipconfig and hit enter. You will get theresults for both ethernet and wireless connections. The i.p. address you are looking for is the one for the Default Gateway.
In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

Setup steps:

1. Connect the computer to one of the four LAN ports on the router.
2. Open a web browser on the computer.
3. In the address bar of the web browser, type http://192.168.2.1
4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

1. Click on "Restore Factory Defaults" in the left-hand column under the Utilities heading.
   
   
   
2. Click on the "Restore Defaults" button.
   
   
   
3. A warning box will open that says, "Warning all your settings will be lost, are you sure you want to do this?" Click OK.
   
   
   
4. The router will begin the restoring process. Once the restore is complete, the router will reboot.
   
   Note: This may take several minutes.

Your router has successfully been restored to its factory settings.

If you need more help come back.Post / thumbs / testimonial are welcome!

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Click on wireless then wireless security Enable WEP then enter new password save settings and restart router .Then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

The security settings ie. encryption is configured in the Belkin wireless settings. You then configured your old wireless card in you computer with these settings so it can connect to the Belkin.
I suggest you also apply these same settings to the wireless cards in your laptops.
To make your wireless network secure from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Use a strong alphanumerical (letters/numbers) password.

Setup steps:

1. Connect the computer to one of the four LAN ports on the router.
2. Open a web browser on the computer.
3. In the address bar of the web browser, type http://192.168.2.1
4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.
   
5. Click on System Settings under Utilities on the left-hand side of the opened page.
   
   
6. You will see a feature called, "Administrator Password". Type in your current password (default leave blank).
   .
   

7. Click "Apply Changes". Your new password is now active.
   

Note: Do not forget the new password and keep it somewhere safe. If you forget your password, you'll be unable to access your router's settings. If you forget or lose your password, you'll need to "restore to factory default". This will reset the password to its default, as well as erase any and all other settings you may have changed.

Hi you nedd to change your wireless configuration to 64bit wep manually.



WIRELESS SETTING UP A WIRELESS CONNECTION

Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works

just configure again your router.


Step 1 : Connect modem - Router - Computer ( Wired )
Step 2 : Open router setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left side under internet WAN click Connection Type
Step 4 : leave the Password Blank and click submit
Step 5 : Choose the connection type as dynamic and click next
Step 6 : Leave the Host name blank and click apply
Step 7 : On the left Under Internet WAN Click MAC Address
Step 8 : Click Clone and Click Apply changes
Step 9 : If the Internet status on the top right is connected
Step 10 : Then check if you have internet
Step 11 : if not Then unplug the Power Cable from the Modem And the Router
Step 12 : Plug the power Cord to the Modem
Step 13 : Wait till all the lights are on
Step 14 : Plug the power to the belkin
Step 15 : Check the color of the light in the belkin
Step 16 :If green then Check if you have internet
If not working then call belkin

======= WIRELESS SETTING UP A WIRELESS CONNECTION ================

Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works

Yes Compatible With my DSL pldt Just setup the user name and password Tel number @pldt
and your password that is your referent number.

if your connection is Dynamic just power cycle the modem and the router

Yes you cant do it manually.

1. Connect the computer to one of the four gray ports on the back of the router.
2. Open a web browser on the computer Internet explorer.
3. In the address bar of the web browser, type http://192.168.2.1 and press Enter on your keyboard.
4. Click Log-in in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

ok now you are ready to setup your router manually.

Good luck any questions just ask me.

please rate me techbelkin

Hi don't worry for the Cd any more I will teach you how to configure your router manually.

1. Connect the computer to one of the four gray ports on the back of the router.
2. Open a web browser on the computer Internet Explorer.
3. In the address bar of the web browser, type http://192.168.2.1 and press Enter on your keyboard.
4. Click Log-in in the upper right-hand corner of the page.
5. The router does not ship with a password, so just click Submit.
6. Click on toward the lines with the option of the menu.
7. Connection type
8. channel and SSID
9. Security
10. Disable WEP and Firewall

and welcome to Internet again with your router Belkin

Good luck please rate me techbelkin

YES IT IS

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works

Go to Belkin : Support : Setup Assistant for Routers

Are you trying to set up the router.
You can do it manually without the CD.
Make sure that your computer is able to go online through the modem.
If your computer is not able to go online through the modem then you will need to call ISP first.
If your computer is able to go online through the modem
then you need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.
Click Here for step by step by instructions

Hi i got your issue

Try with the following steps ....

Step 1:Connect modem>>Router>>Computer

Step 2: Open the browser page and on the address bar type http://192.168.2.1

Step 3: Towards the left column below firewall click on virtual servers

Step 4: It will ask you for the password just leave it blank and hit submit

Step 5: Check whether any ports have been opened

Step 6: If not contact your x-box vendor and get the port numbers and the ip address of the x-box

Step 7: Come back to this page and enter all those numbers and click on apply changes

Step 8: I will give you an example how the numbers has to installed

Step 9: On description type -x-box ..
And on inbound port-enter the port number(as given by the x-box vendor)
And on thye it can be TCP OR UDP OR BOTH
Private is as same as that of the inbound port
Ip address is the ip address of the x-box

Step 10: Open all the port numbers and click on apply changes

Step 11: Towards the left column click on firewall and then disable it click on apply changes

Step 12: Hopefully this will work

If you any issues let me know or contact the 24/7 Belkin technical support 1800-2235546

Thanks .....
With regards....
Priya

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works