HP LaserJet M4345 MultiFunction Printer - Answered Questions & Fixed issues
How to cold reset in HP LaserJet 1536 dnf mfp
Hi,
Resetting the HP LaserJet Pro M1536dnf accomplishes the following:
- Clears all data from the printer's memory (including unprinted data, downloaded fonts, and macros).
- Stops any printing that is taking place and ejects the page.
- Removes some error conditions.
- Resets the printer to its factory default settings.
Reset Procedure:
- Turn off the printer
- Press and hold the Left arrow & Cancel while you turn on the printer
- Once you see Permanent Storage Init you can release the buttons.
- The printer should now start resetting.
Thanks,
HP Printer Support
7/29/2021 11:52:26 AM •
HP LaserJet...
•
Answered
on Jul 29, 2021
•
8,557 views
Laserjet 4345 mfp paper jam
13.20.00 can be also caused be a jam near the fuser (the part of the printer that gets hot to make the toner stick to the paper). Remove the toner cartridge and take a look for small scraps of paper along the whole path. Also open the door on the back of the printer and look for paper scraps from there. If you see paper stuck in the fuser, do not use anything sharp to remove it, be careful not to scratch the surfaces.
1/10/2019 4:33:51 PM •
HP LaserJet...
•
Answered
on Jan 10, 2019
•
4,254 views
SCEA25992
Where did you see that code?!!!!
2/18/2015 11:37:48 PM •
HP LaserJet...
•
Answered
on Feb 18, 2015
•
50 views
SCEA 25992 CODE
switch on the printer
while memory counting press 3 then all led will glow stable then press 9 then start button u will find full nvram on display then press 6
11/28/2014 6:18:49 AM •
HP LaserJet...
•
Answered
on Nov 28, 2014
•
39 views
Erreur 58.04
58.04 error is an Engine Power Supply error.
RM1-1041 is the part number for 110v
RM1-1042 is the part number for 220v.
You will need a tech to swap it out. You have to strip the printer down to get to the part.
10/1/2014 5:21:02 AM •
HP LaserJet...
•
Answered
on Oct 01, 2014
•
218 views
LaserJet Enterprise M4345 INITIALIZING SCANNER message
Try initalizing the Harddrive if that doesn't work.
Try replacing the scanner controlboard or the DC controller.
Or if the MFP is in a dusty room try cleaning the lenses and mirrors in the scanner unit first
7/31/2014 11:44:35 PM •
HP LaserJet...
•
Answered
on Jul 31, 2014
•
1,993 views
13.31.00
13.31.00 = Media is jammed in the
reversing assembly
4/12/2014 2:54:54 AM •
HP LaserJet...
•
Answered
on Apr 12, 2014
•
43 views
Solution57.04 erreur dimprimante hp
57.04 indicates the main fan (FN101) is not working.
Listen for the fan to operate while the printer is initializing. If the fan does not operate during the initialization sequence, replace it.
Part Number:
RK2-0278-000CN Fan, Main Cooling
3/16/2014 1:29:46 AM •
HP LaserJet...
•
Answered
on Mar 16, 2014
•
37 views
Scan multiple pages pdf
I'm assuming that you're trying to scan to your computer.?? I'm not specifically knowledgeable about the HP M4345 printer.... but, it HAS to have a cable connection. The cable should be one that has a usb connection on one end, and a small kind of rectangular plug on the other that plugs into the back of the printer.. Look on the back of the printer. There has to be a connection, besides the jack for the 110 V.
9/10/2015 4:08:15 AM •
HP LaserJet...
•
Answered
on Sep 10, 2015
•
789 views
How to assign ip address for laserjet M4345 when it is reset at 0.0.0.0
1 Press MENU.2 Touch CONFIGURE DEVICE.3 Touch I/O.4 Touch EMBEDDED JETDIRECT MENU or EIO JETDIRECT MENU, depending on which type ofnetwork connection you are using.5 Touch TCP/IP.6 Touch CONFIG METHOD, and touch MANUAL.7 Touch MANUAL SETTINGS8 Touch IP ADDRESS9 Touch the left arrow or the right arrow to highlight each segment of the IP address.10 Use the numeric keypad to type the digits in each segment of the IP address.11 Touch OK to save the IP address.
9/17/2013 10:28:10 AM •
HP LaserJet...
•
Answered
on Sep 17, 2013
•
1,633 views
Not finding what you are looking for?