20 Most Recent Sony PlayStation 2 Slimline Console - Page 4 Questions & Answers

Most likely caused from dust under the DVD Deck. This requires that you open your console and blow the dust out ( DO NOT USE A VACUUM Tiny parts can be sucked up that will render it completely useless). After you have done this and put it back together again clean the laser as dust will have collected on it from when you blow out the dust. If you do all this and it is still doing the same thing it just could be a case of the poor old PS2 is wearing out.

Try Ebay or go directly to Sony Repair shop, They still stock all parts for all versions of the PS2

You may need to take apart you PS2 and rotate the white gear about 1/8 of a turn or so and test with just the DVD lid on before you put it back together. If you still get the error try another 1/8 of a turn and so on. Detailed instructions and pictures can be found here on how to take apart your PS2http://www.tweak3d.net/articles/ps2repair/4.shtml

u can run ps2,psx,xbox games from pendrive
use dis software
http://www.ps2-scene.org/forums/official-ulaunchelf-forums/37242-unofficial-launchelf-v4-30-a.html
ONLY USE uLE V4.30 and NOTTTT v4.31
(check youtube if u dont believe me)

Try $99
http://www.frys.com/catreq/6746

There are a couple of things that you can try. The main issue is there is a problem with the laser, try to clean the lens of the drive.  If this does not work, then you laser is bad.  You'll have replacement with new laser.

how to modify ps2 fat without modchip

Did you try moving the end of the AV cable that's connected to the PS2 system while it's on? It may be a bad connection on the actual system. If it is, that can really only be fixed by Sony.

o8ji9

I bough ps2 with cracked after 3-4 days not working dvds are not read.sometime it's working some dvds..so plz solve my problem...

If it happens for all your discs then clean the PS2 with a laser lens cleaning kit like this one:http://www.sears.com/shc/s/p_10153_12605_05829423000P?prdNo=11If it only happens for one disc then bring the disc to a game store like Gamestop or Rock30 Games and have them professionally clean the disk for a couple bucks.

if your ps2 is not a modded one sorry to tell you but yours is a pal ps2 (means you live somewhere in asia europe)so there is some difference i the american ps2 disc(ntsc) and pal ps2 disc both are designed to play in specific consoles so if you bought they console from ntsc territory(japan ,north america) it should work for sure but sometimes in japan and all they sell pals also but there is still chance try returning the cd to the shop and buy a pal disc or you can mod your ps2 from ps2 technicians (they are all around the world,every console shop has one) and then you can play american disc this is the only chance it will only take a small 25 bucks from you just mod it and u can play games u burned from your computer and also any pal ,ntsc territory original discs also

Hi,well yur problem is not new.i gues u have played a lot and lot of games in the past in yur ps2 and tht is why mod-chip device is been damaged.It's a serious problem.If u'll not replace yur mod-chip now thn your playstation2 will be damaged soon.u live in india and mod-chip will cost around RS-300.

good luck

your playstation needs to go to local electronic fix it shop for internal diagnoses and probable component/parts changes.

Remove the blob of solder so the area in the red circle looks like this, or the laser will not engage.

Take the game out and see if the laser is towards the back. If so, pull the eye towards the spindle or where the hole of the game goes.....and clean the laser eye with a q tip soaked in alcohol.....