20 Most Recent Sony PlayStation 2 Slimline Console - Page 2 Questions & Answers

TOC disk error normaly occurs when tool 1 of the set that goes in the small square hole at the front left of the drive bay above the power switch is missing or installed wrong
have a look at this

http://www.mod-chip.com/Lite/Magic_Key_2_PS2_Install_Lite.pdf

because you have offed the ps2 slim

first, make sure the disks themselves are clean and free of scratches. often as not a disk read error on a PS2 is because of dirt. if the disk has a blue back, however, there's a special proceedure to get them to run (the blue ones are still in CD format instead of DVD)

First, I would recomend that you check that all of the cords are hooked up. The audio, video,,,,,Because if these are not connected, then it will read as faulty, and not turn on.

Do what? The PS2 slims, are on standbye as soon as you plug it into the power.

Turn down for what?

not here

You probably have dirty unreadable disc, or damaged laser. Try another game or clean the disc.

If you are talking about the PS2 "FAT" or "SLIM"? The fat has a switch in the back that cuts all power, but the slim stays in standby mode unless you unplug the system.

https://www.google.com/search?q=Cheats+for+the+Lego+movie+ps3&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel=rcs

Did you remove the anti static solder blob (point) on your new laser with a soldering iron and solder wick prior to installing it? The symptons your explaining indicate that point is still intact, If so you will need to carefully remove it first then reinstall the laser and try again.

Which mean you are enter a wrong disc or pirated disc.

Gaming console ,AV cable ,instruction book and one wire controller

There're 2 switch on the motherboard ,functional for closed the cover to turn on the DVD game ,check the 2 switch is that possible way working on that. Take off ps2 casing ,using 2 finger click on ,once the laser moving abnormal ,which mean one of the switch functional not well in the system ,crab a solder iron bypass on the switch .

Download the ISO file from internet ,burn to a DVDR using image burn software .it might useful

Checking yours AV cable is that possible broken ? Any sound when you connect on yours tv? If have sony welcome screen logo sound ,this mean motherboard output resolution chipset burn or dry join .well does not show up anything after changing AV cable ,it might be ram or CPU chipsets .

This is the motherboard chipsets burn ,if you are not professional technical ,please send to work shop ,it could help

Hi,
     According to the symptom The lens of your PS2 needs replacement, Contact any expert nearby and replace the lens and your console work fine again.
     Thanks for using fixya.

Solution menthol faster crab a new ps2 slim lens for changing ,this is faster way for solved yours problem.

buy a new power button in ebay or amazon