20 Most Recent Electrolux EIFLS55IIW - Page 7 Questions & Answers

You're probably right per error code. But most likely if you smell electrical burning, it's you main board issues if you bought pressure switch get the main board as well, part no. 134640610.

If you purchased this washer it should come with 4 shipping bolts on the back. Hopefully you saved it, if not you could probably order one based on your model. Fabricating some could potentially damage internal parts. If you can't find shipping bolts, you could probably buy some screws that would fit in the back with sleeves and washers.

https://www.youtube.com/watch?v=J7vzWGMvfOM https://www.youtube.com/watch?v=72nvG68XtDQ https://www.youtube.com/watch?v=EB-bDYsY4ew

look for manuel https://www.electrolux.fr/support/user-manuals/

https://www.applianceblog.com/mainforums/threads/58174-EIFLW55HIW0-E58-E59-error-codes-no-spin

http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ Visit this site to get some details.

http://washererrorcodes.com/electrolux-washer-error-codes Electrolux EWM1100 Service Manual Troubleshooting According To Alarm Codes...

check the top edge of the front panel, sometimes there's two clips, one on the left top and one on the right top of panel. undo the clips and it should come off. Or if there are no clips you might have to just lift up to clear a notched edge. Clips could also be on the bottom, Either way most machines have a second way of holding the panels or tops on. hope this helped. Lynn

first try reversing the hoses to see if that remidies it.

hello... it may help... error descr. cause action reset E43 Power triac on door interlock faulty Door safety interlock faulty; Wiring faulty; Circuit board faulty. Safety drain, door released Selector on "0"

find reset function bottons find youtube video how to reset your brand model or similar model and follow instructions on your owners manual

Can you turn off your overdrive? When towing most vehicles have an overdrive off mode. You can’t tow in 5th or 6th gear and may confuse computer and put car in protection loop mode.

I don't think you have all the correct error code. should be an "F" number before the "E" number. does make a difference. I want to give you the correct info.

If you remove the drain hose, and lay it down low as possable, it will drain the water out by gravity, this might help you out.

E21 is error for water not draining fast enough.

You may need to remove the front panel like on my Frigidare washer. Removing the retaining spring ring holding the seal may be tricky.
I learned from watching a repairman do it.

My filter got clogged because the drum impellers tend to break a piece and let change and stuff go to the filter.

Make sure water is on with cold connected to cold and hot. Make sure screens in hoses and valve are not clogged with debris