20 Most Recent NetGear DG834G Router - Page 4 Questions & Answers

if you go to amazon kindle they will help you wiyh everything for your kindle

You can't. It translates your ISP modem IP to the router. You need that communication. I

Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL - http://192.168.0.1 The default login = admin The default PW = password You can now change the default admin password and configure the wireless settings. Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption. Now apply these settings to the wireless card in your laptop/computer. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Things That Affect Wireless Router Signals1. Many wireless routers are using the same wirelesschannel. Many manufacturers choose channel 6 as the default. Change to anotherchannel.2. Analogue video senders used to send audio and video toother TVs in the home.3. Microwave ovens emit interference in the 2.4GHz band.4. Wireless speakers and console controllers can causeinterference with the wireless router.5. Bluetooth devices, newer Bluetooth devices can jump todifferent frequencies if there is a connection problem.6. Power cables located near the wireless router can causedropouts and speed reduction.7. Fish tanks will cause massive Wi-Fi shadow on the otherside of the tank from the wireless router. 8. Depending upon the location of large mirrors will reflectwireless signal away your computer.9. Building materials will block wireless signals such asplasterboards with metal foil, reinforced concrete walls and floors. Alsoobjects near the wireless router such as metal filing cabinets and otherelectrical appliances. 10. Blinking Christmas lights can reduce Wi-Fi performanceby 25% when it is close to the wireless router.

should be the same as your router 192.168.0.1

Some later model wireless routers have the Password(ie.Encryption key) and the SSID already configured in the wireless router andthis information is printed on a label on the bottom of the router.These settings can be used to configure the wireless card and wireless adaptersin your computer/laptop. If these settings do not suit you, then it can be changed to suit yourrequirements. The encryption key secures your data and wireless connection from unauthorizedaccess.To configure the wireless settings in the router, connect a LAN cablefrom your computer to the wireless router, then open a Browser on your computerand enter the router's configuration IP address, then enter the admin login andpassword and then go to the wireless settings and configure the SSID andEncryption key.The router's encryption key can be a Passphrase or the WEP or WPA or WPA2key.If you use the Passphrase method select either WEP or WPA or WPA2 togenerate the encryption key. You can enter the WEP or WPA or WPA2 key with 8 to63 ASCII characters or 64 Hex digits.Most people use Passphrase which is easier to remember eg. I was born inJanuary 1988.The strongest and latest security is WPA2, the weakest and oldest is WEP. Toconnect to your wireless router from the computer/laptop, configure thewireless card in your computer/laptop with the router's wireless settings ieSSID, plus the WPA or WPA2 encryption key. Then computer/laptops cancommunicate with your wireless router.http://www.fixya.com/support/r10267861-network_security_key

Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -http://192.168.0.1The default login = adminThe default PW = passwordYou can now change the default admin password and configurethe wireless settings.Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Hi, please perform the below steps to configure settings on the router:

1. Connect a computer to the router using any one of the 4 available ports.
2. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
3. Access the router, usually with http://192.168.0.1 or http://www.routerlogin.com.
4. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
5. Click on WAN setup from left menu. Check the box for 'Disable Dos Protection'.
6. Set the MTU size to 1400. Click apply.

I hope this information allows you to resolve this issue.


If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.


Regards
Anand

To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -http://192.168.0.1The default login = adminThe default PW = passwordYou can now change the default admin password and configurethe wireless settings.Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.Apply these settings to the wireless card in your laptop/computer.To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

the default login for netgear routers is user name = admin and password = password. for older devices it is 1234.if you are unable to login. you can reset your router to factory settings by holding the reset button in with a paper clip for 30 seconds with the power on.

HOW MUCH SPEED YOUR INTERNET CONNECTION HAD? FOR VIDEO CALL AT LEAST 3 TO 5 MBPS IS NEEDED.

try downloading wireless key viewer on a computer that has the key already in and working. It my be a long key as it is converted into a different format so you may need to copy into word accross a network or on a pen drive and then paste from it into the laptop you have forgotten the key for.

http://www.nirsoft.net/utils/wirelesskeyview.zip

Please rate my support

1. In your iPhone, go to Settings>General>About. Then, scroll down to "Wi-Fi Address". This is your MAC address. This you will need in order to authorize your phone in your Netgear page (which usually looks something like ***.***.X.X (where "X" are numbers)).2. Log in to you Netgear page.3. On the blue left panel of the screen, click on "Wireless Settings". A new page comes up.4. Click on "Setup Access List".5. Click on "Add" to enter the require info needed for your phone to gain access to your network.6. On "Device Name" I entered "iPhone". This name is irrelevant for i named my iPhone differently and using just "iPhone" worked. So enter whatever name you wish, but keep it simple.7. Now, on "Mac Address" (the single most important info here) enter the number you obtained in Step 1. Make sure you enter it with the colons (:).8. Add and apply, and wait for the blue bar at the top of the screen to do its thing. It will take only a few seconds to update the network.That's all! Connect and enjoy!

Hello. Do you need the wireless password or the router login password? If you need wireless password(security key like WEP or WPA) or you would like to setup wireless security for your Netgear router, access the router setup page by typing http://192.168.0.1) in the address field of your browser and then press Enter. Enter admin for the router user name and your password (or the default, password).

This image is a sample of the login window to access the router's setup page.

After logging in. Look at the main menu on the left, click on Wireless Settings, from there you can check the Wireless Key(usually indicated as "passphrase") or you can setup wireless security from there if you haven't done so.

This image is the router's setup page and this is where you can configure the router and check some settings like Wireless security or password.

**If by chance you are unable to access the router's login or setup page by using the default username &password(admin, password) and you totally have forgotten it, you need to reset the router to factory or default settings then you have to setup the router again. **To reset the router to default settings:

1. Unplug all the cables attached to it except the power cord. - Make sure the router is plugged into the power outlet, then hold down the reset button at the back of the router for 30 seconds using a paper clip or a pen. You should see the lights flicker momentarily on the front panel of the router.

2. Once the lights are stable, connect 1 computer or laptop directly to the back of the router(Ethernet/LAN ports usually they are labelled by numbers and have the same color, just pick one). If you pick number 1, check the corresponding light indicator at the front panel of the router, make sure light 1 is also lit up if not choose another port at the back of the router.3. Setup and configure the router again.

~~Hope this helps~~

1. Reset the router to factory settings.

- Before you reset the router, unplug all the cables attached to it except the power cord.

- Make sure the router is plugged into the power outlet, then hold down the reset button at the back of the router for 30 seconds using a paper clip or a pen. You should see the lights flicker momentarily on the front panel of the router. //

2. Once the lights are stable, connect 1 computer or laptop directly to the back of the router(Ethernet/LAN ports usually they are labelled by numbers and have the same color, just pick one).

- If you pick number 1, check the corresponding light indicator at the front panel of the router, make sure light 1 is also lit up if not choose another port at the back of the router. //

3. Access the router's setup page by typing http://192.168.0.1 orhttp://www.routerlogin.com/basicsetting.htm in the address field of your browser and then press Enter. Type admin for the router user name and your password (or the default, password). Setup and configure the router again.

test

- I suggest you first clear browsing history. Clearing browsing history varies from the browser you are using:If you are using Internet Explorer (go to Tools>Delete Browsing History)For Firefox( click on the Firefox tab> History>Clear Recent History)- Restart the browser and try to access ebay again. If you can access other websites(google.com, yahoo.com, etc) but not ebay try to flush dns. Flushing dns will make the system recheck and refresh the DNS cache on your computer.- Since the computer keeps address's of the websites you visit, it remembers the route and IP address of a specific website, if that changes and your computer still goes to the old route that's when you get a problem with opening the website, so the way to refresh your computer's DNS is to clear DNS cache.1. Go to Start then type CMD on the search box. 2. When the black screen appears(command prompt), type in ipconfig /flushdns then press Enter on the keyboard.Restart your browser then try to access ebay.

Hello. If you need WIFI password, access the router user by typing http://www.routerlogin.net or 192.168.1.1 in the address field of your browser and then press Enter. Enter admin for the router user name and your password (or the default, password). After logging in. In the main menu on the left, click on Wireless Settings, from there you can check the wireless security Passphrase or Key code. Hope this helps.

• If your are trying to connect via wireless from your laptop to the Netgear router, most likely it's requiring you to input the wireless security key(usually it's WEP or WPA encryption).

• Access the router's setup page by typing http://www.routerlogin.net or 192.168.1.1 in the address field of your browser(IE or Chrome). On the login use the default username and password(admin, password).

• After logging in. Look at the main menu on the left, click on Wireless Settings, from there you can check the Wireless Key. If the wireless security is set to WEP, use the available Key code but If it's WPA, what you need is the passphrase.

Type the Key or Passphrase on your wireless laptop and it should connect to the router.