20 Most Recent NetGear DG834G Router - Page 7 Questions & Answers

There were so many cases or possibilities why you can't able to connect to the internet please try some of the steps below.

Try to obtain a new IP from your router. Open your command prompt, type cmd, then type (ipconfig /release) after that type (ipconfig /renew) and try to connect again.

Try to ping a particular site. Open the command prompt type in (ping www.google.com) for example, if you the site reply it means you have a browser problem. Uninstall your browser and install a new one.

Spyware also messes up with internet connectivity you can download a free edition of antispyware at http://www.superantispyware.com and scan your pc against malware and spyware.

To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Try to RESET the Netgear wireless router, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between 10 and 30 seconds depending on the router. You may need a pin or something small to push in the button, because it can be recessed. Once you have reset the router, the username and password will be changed to the defaults, admin and password, respectively. One thing you must remember is that resetting the router will change all of the router settings back to the factory settings. This means you will lose all of the changes you made since you got the router. Make sure to write down any things you've changed, so you can change them back after the reset. Also, I recommend updating to the latest firmware after the reset.

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

check your network adapter settings to make sure your set to automatically obtain ip address, if this doesnt work, try connecting with a cable and go into your router settings to see if there is an access control list for the wireless side

Try RESETTING your Netgear back to the default settings and configure it again.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash. Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the admin password and configure thewireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

change the settings of your router if your laptop is using wpa change the security setting wireless connection of your router to wpa... their are many categories of security settings ex. wpa, wpa2, radius, wep, etch.... first configure thE WPA OF YOUR LOPTOP.. HERE IS THE LINK THAT WILL HELP YOU TO CONFIGURE THE WPAhttp://compnetworking.about.com/cs/winxpnetworking/ht/wpainwindowsxp.htm SECOND IS TO SETUP YOUR ROUTER CHOOSE WPA, OR WPA2

change the settings of your router if your laptop is using wpa change the security setting wireless connection of your router to wpa... their are many categories of security settings ex. wpa, wpa2, radius, wep, etch.... first configure thE WPA OF YOUR LOPTOP.. HERE IS THE LINK THAT WILL HELP YOU TO CONFIGURE THE WPA http://compnetworking.about.com/cs/winxpnetworking/ht/wpainwindowsxp.htm SECOND IS TO SETUP YOUR ROUTER CHOOSE WPA, OR WPA2

Please go through the below link to resolve the issue:

http://www.fixya.com/support/r4095687-check_wireless_security_key_or

Hi Harris!

Please go through the below link to resolve the issue:

http://www.fixya.com/support/r4095687-check_wireless_security_key_or

If you are satisfied with the above information and your problem has been solved, I'd appreciate it if you could accept the answer and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards

Anand

Sorry Paul! We can not assist you for this request.

Hi,

All wireless routers support all types of computers regardless of the operating system. For the manual you requested, you can get it at http://support.loxinfo.co.th/adsl/pdf/netgaer834.pdf

Thank you for visiting FixYa! have a good one!

Well pressing the two buttons together for around 5 seconds would cause the router to revert to factory default settings and that will reset the password and IP address.

Please revert for any further clarification.

Regards

Anand

Look underneath the router, you will have the password printed on it.

1.Take a Ethernet cable and attach it with your router and one of your pc
2.open internet explo and goto 192.168.0.1
3.user name=admin password=password
4.now a web interface willopen and you can setup your router.

Hi!

You cannot. Only one configuration can be set to it but workaround is you can use 2 routers, and set the other for static and the other to dynamic to serve its purpose.


Hope this helps.

First thing that I would try would be to:

1) Unplug the power from the wireless router. Let it sit for 20 seconds.
2) Plug unit back in. Let sit for another 20 seconds.
3) Retry.


Good luck!

I understand that you are not able to connect wirelessly through the router DG834G. Please perform the below task to configure the required settings:

1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.

2. Access the router's GUI by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.

3. When prompted for Username and Password, please enter 'admin' for the Username and 'password' for Password.

4. Click on Wireless Settings'(under Setup) from the left menu.

5. Select security options as 'WEP (Wired Equivalent Privacy)'. Set the 'Authentication Type' as automatic. Set the 'Encryption Strength' as 64-bit.

6. In Key 1 type a 10 digit number. Apply the settings.

Please scan for the wireless network on your wireless enabled computer and connect to the network of the router using the security key as mentioned above. If the issue persists, then please let me know about the operating system installed on the wireless computers.

I hope this information allows you to resolve this issue. Please revert back for any more assistance on the same.

Regards

Anand

I understand that you would like to setup password on the wireless connection of the router DG834G. Please follow the below steps to enable security encryption:

1. Open a web browser (Internet Explorer, Mozilla Firefox or Safari) on a computer connected to the router.

2. Access the router's GUI by typing 'http://192.168.0.1' or 'http://www.routerlogin.com' in the address bar.

3. When prompted for Username and Password, please enter 'admin' for the Username and 'password' for Password.

4. Click on Wireless Settings (under Setup) from the left menu.

5. Select security options as WPA-PSK. Enter a Password in the passphrase box. Apply the settings.

Please use the password as set above on your wireless computers to connect to the wireless network.

I hope this information allows you to resolve this issue.

Regards

Anand