If you have software installed on your computer, you should be able to pull up your settings and password from there. If you know your IP address you can type it in to your browser and do it that way. That is the way I check and change my things for my router, but I have a linksys router. If that doesn't work try going to the NetGear website FAQ section. They should be able to give you an answer.
try to reboot your netgear router. if the same issue persist, try deleting the wireless networks saved to your computer and try to reconnect. Hope that works. regards
Thank you for availing our service, in order for me to help you further I will ask for some further details about your problem including the brand and model of your computer and also your wireless router and the operating system of your computer.Please also inform us how many computer do you have including how many are wired and wireless computer, will be waiting for your message.
browser, ( internet explorer or firefox )3. go to the address bar, the one with the http:\\ and erase everything inside it.4. type in there, 192.168.1.1 or www.routerlogin.net.5. username is " admin "password is " password "6. you would see netgear set up wizard. 7. for wireless configuration, click wireless settings on the left side of the set up wizard.8. you can edit network name, and get your network security key under security options. make sure to choose WPA PSK TKIP. so that you can have a personalize network key9. the network security key is the " passphrase "then click apply.in this way, your password is personalized and your network is secure
See if you can access the router settings with the default user and password, which is "admin" and "password". If you are still locked out, reboot the router. If still locked out, look on the bottom or back of the router for a very small hole to stick a paper clip end in,, to reset the router. Once reset you will have to use the default user name and password to access the settings and change the password to your liking. Hope this helps FixYa up.
hi there, i have a magic jack and i'd like to use the voicemail the recorded voice is asking me for a mailbox assigned in my system, i'm usinf window vista and i dont know where to get a mailbox number please help!!!
Connect your router to computer with ethernet cable then you can access
it with following default link. http://192.168.1.1 or http://192.168.0.1
or http://192.168.15.1 or http://192.168.2.1 If you are not able to
access it with above ip then check your computers ip address gateway ip
is your router ip try with it. Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router. If you are still not able
to access router with above ip then you need to RESET it for that press
RESET button for 10 seconds it is in back side of router then all
settings defaults..Then you can access it with above method. . Then
click on wireless->wireless security->WEP security there is code
password note down it or enter new password then save setting s and
restart router. then you can connect wireless with new password. Let me
know if you need further assistance. Thanks for using FixYa.
I purchased a Netgear DG834G Router a little over two years ago when I switched from dial up to broadband. It is the router that came from the broadband provider and following the initial set up which I was talked through by tech support, I have had little trouble with it - at least until a matter of days after the warranty ran out.
Connect directly to the device with a LAN cable.
Open a web browser and type in 192.168.0.1
The default username is blank (no characters)
and the defult password is zebraonce in the router configuration go to security and change the WEP password, or better change it to WPA and make a password. WEP is considered a weak encryption and even with a strong password can be hacked in just a few minutes. http://www.youtube.com/watch?v=GqleMWzSvUk
However unlikely it is that someone would try to hack it.
have you tried clearing the cache and cookie in the settings part of your xbox? after doing that if it still doesnt work try remove any memory sticks, memory card or hard drive. it should work by now
This is offline page dear, you can not get the internet please check the following option in you router.
1) Please make sure you put the correct User Name and Password.
2) Check your PC or Laptop IP address configuration.
3) Restart you router and go to command line.
4) And type Ping to yahoo.com exp (ping yahoo.com)
5) If you get the reply its mean your proble solve you get the Internet.
Hi if it shows local only means you not connected to the internet and only you can access your network make sure you apply wireless password to make your network secure check the WAN cable which directly connect to your NetGear DG834G Router you can disconnect that directly connected to your laptop and see if you can access the internet should you need any other help please contact me on my weblog http://computernetworksupportindubai.com/
