NetGear DG834G Router "enable multicast" Questions

...also supports IPv4 PIM SSM. Protocol Independent Multicast-Source-Specific Multicast (PIM-SSM) enables a user host to rapidly join a multicast group if the user knows a multicast source address. ...

How enable multicast traffic on RVS4000? 1.Your router is set up for multicast automatically 2.Look at the QOS or traffic shaping.

...enable UPNP, or disable a firewall on the internal traffic. Make sure multicast is enabled, and the devices is in the same IP scope. that all devices have ip´s like: IP: 192.168.0.??? (where ??? ...

...Go to Advanced Tab > Advanced Network Check the following : Enable UPnP Enable Wan Ping Respond ( Wan Port Speed - set to Automatic ) Enable Gaming Mode Enable Multicast Speed Save the

...enable or disable WAN Blocking. Just always says "Block WAN Requests" under firewall. The feature you are referring to "Block Wan Requests" is either enabled or disabled In the pane to the right, ...

enable multicast to use Chromecast with Actiontec GT701-WG. Say's not wireless found in Chromecast All other wireless devices work but chromecast says no wireless found. according to google this ...

connect to network but no internet. there is no IGMP option for Enable/disable. where I found it for multicasting through Chromecast. Try updating the firmware of the router. Here's the link ...

...Enable IGMP Multicast Option Check Enable WAN Service Option Enter the Service Name as Dataone 10. Click Next and Save. You should also save and reboot your modem. If doing the above does not works, ...

...multicast data is changed (3600 is default). Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase in ASCII format at both ends of the wireless connection. The ...

...Enable multicast streams: UNCHECKED Here are my wireless settings: Enable Wireless : CHECKED Wireless Channel : 11 Enable Auto Channel Scan : NOT CHECKED Super G Mode : Super G without Turbo Enable ...