20 Most Recent
Konica Minolta Di1610 Copier - Page 3 Questions & Answers
C0520
- 1. Turn the machine OFF.
- 2. Press and hold the STOP key.
- 3. Power the machine ON and release the STOP button after 5 seconds.
Problem with di1610.always says change t/c-
TC type is set to the wrong value.
Set the TC type value to 5. To change this setting, perform the following:
1. Press Utility
2. Enter the Service Mode (Stop-0-0-Stop-0-1).
3. Select number 4 Display.
4. Scroll to TC Type.
5. Enter 5 and exit.
Minolta 1030 blank copies?
Hello George;After you replace the drum, you have to push drum unit and developer unit closer,and the fasten it if stll don't work go to check the charge unit see there have broken crona wire ,if they do repace it.
Not finding what you are looking for?