20 Most Recent Roland Juno-D - Page 3 Questions & Answers

record songs with a midi sequencer. the d beam is fun but not very useful!

i think you need new membranes, they are hard to fix.

juno, lovely instrument, try the synthesizer repair centre in london

you could try using 2 midi channels for two sounds.

If you have the new Juno here is a link to their update:http://www.rolandus.com/products/productdetails.php?ProductId=429 Also try looking in your manual for the initialisation procedure. This will return your keyboard to the factory settings .

You either did not get the ribbon cable seated OR got it upside down.

If this cable is the flat ribbon with exposed solder plated points of contact, OFTEN those connectors have a latch to release by GENTLY moving tabs on eaither side in the direction of pulling the cable out. This lock MUST be moved out slightly to allow the cable to seat properly. The solder plated contacts will be FULLY into the connector when seated properly.

These cables ALSO can be inserted backwards and NO connection will be made.

The conductive rubber pill contacts AND the traces oin the circuit board should be cleaned with 99% isoprophyl alcohol, nothing else. Use a Q-Tip moistened with the alcohol.

Normally you have to clean the conductive rubber "pills" AND the circuit board traces they get pressed down on.

USE ONLY 99% isoprophyl alcohol on Q-Tips to do the cleaning and be gentle.

Use of other product like deoxit and other contact cleaners will wreck the contact material.

i would suspect it will not stand the extra heat. i am familiar with electronics but not that particular device. does it have a cooling fan and if not it would be handy if you can install one or if it does have one it needs to be cleaned. have you had any other issues using it inside ?

robert

It sounds like your volume slider is dirty. Try carefully and judiciously spraying a good quality contact cleaner into the slider and working it. do not use a lot. It only takes a little. Also do not use WD40.

Hello. Hello. Generally the upper LCD display of bars is an indication that the internal battery is on it's way out and needs to be replaced.
In case you do not have the owner manuals, they can be downloaded from this address - enjoy: http://soundprogramming.net/manuals/Roland_D-20_Manual.pdf

I wonder why the ribbon cables have been replaced as they do not fail. Check the keys actuate the contacts properly.

I can't! In my opinion, no. Start drift boss customize your car by choosing different colors and patterns.

most likely we dont have crystal balls --need to have diagnosed for problem

Yes, you can use the second pedal on a Roland BK-5 keyboard to transpose the key of the music that you are playing up or down by a semitone at a time. To do this, you will need to press and hold the second pedal while playing the keyboard. You can also use the transpose function in the settings menu of the BK-5 to adjust the key of the music that you are playing by a specific number of semitones.

I am also using IOS and Android. So how can I improve some features? The black screen helps you relax when using the computer too much.

Question edited for a bit more clarity. Video that might help https://www.google.com/search?q=Roland+octapad+spd30+dead Owners Manuals only. https://www.google.com/search?q=roland+octapad+spd30+service+manual ..