20 Most Recent Roland Juno-D - Page 9 Questions & Answers

Contact Roland in whatever country you're in for the service centers in your area. For instance in the USA check this link-
Roland Support Service Repair Service Center Locator

Roland Music | Answered on Apr 18, 2016

Contact Roland directly. Speak to their customer service department in your country. I beleive this is the info-
If it's just a parts availablitiy problem, remember that Roland is a world wide company. Contact Roland in other markets, starting close to you and expanding out. Somebody will have it. I'm in the USA and often source parts from Canada, for instance.
If the instrument is truely dead, you can always sell it for parts to other users. Ebay would be a good option.

Roland Music | Answered on Mar 25, 2016

That sounds like a compnent failed in the preamp section. This will not be user servicable and will need to go into the repair shop.

Roland Music | Answered on Feb 09, 2016

if its less than five years old then you maybe able to order it right from roland , older than that you can always ask them but you might be out of luck , a friend of mine had a problem with his keyboards display too and it turns out it had a external display monitor output on the back, ive rigged him up a small 4 inch tv that plugs right into it and now he can select all his functions using that . works

Roland Music | Answered on Jan 30, 2016

As far as I know, Roland programs all it's drum sounds in all of it's instruments from the factory to the same note numbers.

Roland Music | Answered on Jan 13, 2016

As long as your power supply is supplying the correct voltage and the amp rating is sufficent, and of course the power supply itself is functioning, then your problem is more likely to be a routing error somewhere.. it's probavbly best to center all controls, disengage all switches, and start over from nothing. You should also check that what ever you are using to hear the signal is functioning correctly as well.

Roland Music | Answered on Dec 29, 2015

Assuming you have checked the fuses, it's most likely the power supply. It will need to go to the shop.

Roland Music | Answered on Nov 07, 2015

to get an answer to that question you will have to first comment on what it is doing that makes you think something is wrong

Roland Music | Answered on Oct 16, 2015

As I recall, D110 voice programs will tranfer the voice data to D4/10/20 but not D50. However, no setup or performace data will transfer.
However, it's been quite a while since I've used a D110.

Roland Music | Answered on Oct 10, 2015

This will not be user fixable. Check the Roland site for a service center near you.

Roland Music | Answered on Sep 18, 2015

Disassembly the unit.
Your question is less detailed. If the keys is broken,replace with new.
If you mean "How to",then you need the service manual.
Outputs problem,usually causes by output IC (or input IC) is defects.
It also can cause by AD/DA IC is error.

Roland Music | Answered on Sep 02, 2015

Yes, in most cases a Roland Me70 can be repaired.

Roland Music | Answered on Aug 03, 2015

The instructions are on page 77 of the manual, which is located here-

Roland Music | Answered on Aug 02, 2015

You should re-initalize the keyboard. If that doesn't work, contact roland customer service.

Roland Music | Answered on Aug 01, 2015

Not finding what you are looking for?
Roland Juno-D Logo

66 questions posted

Ask a Question

Usually answered in minutes!

Top Roland Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Cameron Lewis
Cameron Lewis

Level 1 Expert

64 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Roland Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Roland Music

  • Roland Music

Most Popular Question

volume knob juno d 61 key synth roland

  • Music