...power washer won't stay on after I start it Power washer won't stay on and shuts itself off as soon as I start it low oil pressure switch faulty or oil level low, disconnect pressure switch then
troybilt pressure washer wont stay running more than a few seconds Check the oil level. Yours may have an oil sensor switch.
switch) Water is going through the machine, but only at mains pressure. The lance is not blocked. Detergent flow is OK. The pump appears to be dead. Dear ralph_birtwi, Most pressure washers when their
switch on, the pressure washer turns on by itself I'm guessing that you have a small electric washer. These come on when triggered.....or if there is a water leak on the high pressure outlet
Question about Karcher Garden
my karcher 399m has started to stay switched on when trigger hose is released and also when i turn the body switch to the off position , i have to disconect the power by unplugging the machine from ex
...pressure switch flow switch and thermostat normally are connected in series for burner to come on they all must connect.if u disconnected fuel solenoid connector and burner stays on while your ...
...heating as the flame will not stay alight hi could be many things dirty fuel / filter dirty or broken flame sensor /broken thermocouple broken/incocectly set pressure switch hope this helps ...
...pressure washer hose blows off when I close the trigger and it is screwed on tight. Whats wrong? The first thing is that for sure the screw thread on the machine or at the end of the hose is damaged. ...
Question about Garden
...switch on the machine to off & now I Power stays on even when on/off switch is turned off this switch normally makes a contact to ground or chassis also ensuring the switch is or has ground ...
wont turn on , light on plug will not stay on after release of button most likely faulty switch. Use licensed repairman for electrical hazard.
358 questions posted
Usually answered in minutes!
685 Questions
123 Questions
72 Questions
36 Questions
34 Questions