Karcher Garden - Recent Questions, Troubleshooting & Support


Had the same problem and it turned out to be an obstruction in the nozzle and I mean a small obstruction, it looked like an ant leg. I pushed a 1mm drill bit through and now it works fine.

Karcher K2.26... | Answered on Apr 07, 2019


hi could you post your email address and i can email you a full pdf file, also on the chassis of the machine there will be a silver sticker could do with all the numbers to find which modle it is regards

Karcher PSI... | Answered on Mar 19, 2019


Try this link:
https://www.youtube.com/watch?v=4WZgprLndhU

Karcher Garden | Answered on Mar 16, 2019


Maybe press regulator was reset before the unloaded was installed and needs to be set at lowest and then increased as needed.

Karcher Garden | Answered on Mar 06, 2019


This happened to my FC5 too. I found that the detergent outlet within the suction head was clogged up. This is the receptacle for the brass nozzle you can see when detaching the suction head (by pressing the grey button and gently pulling on the yellow "cover" at the top of the cleaning head - Figures 16.1 and 16.2 in the manual). To check it is indeed clogged, put a few drops of water in it - they won't drain out. To purge it I used the jet from a handheld steam cleaner, and I also used the steam jet to clean the suction slots. Be very careful not to scald yourself, wear gloves, and when cleaning just pulse the jet so as not to risk damaging the plastic parts.

Karcher Garden | Answered on Dec 29, 2018

Not finding what you are looking for?
Karcher Logo

2,493 questions posted

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1407 Answers

Ian Summerfield
Ian Summerfield

Level 3 Expert

502 Answers

JOHN LAPIER

Level 3 Expert

2591 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...