Frigidaire Gallery GLEFM397DS Electric Kitchen Range "gas oven flames" Questions

gas] oven will not heat. The ignitor lights. The gas strip has small blue flames lit along it. However, no matter what i turn the oven up to the flame will not increase. Gas oven burners are usually a

...problem with your gas oven, is the igniter is not hot enough to ignite the gas. a common problem with gas ovens. replace the igniters. thanks the appliance doc. please rate my answer, if happy

...gas oven flame my parkinson cowan oven is not reaching the right temperature.on first ignition the flame no longer gets high it stays low as if the oven has got to the correct temp,but its only warm ...

...oven flame on my Kenmore Gas Range. I have already adjust the gas orfice. Smokes up the oven , flames come up both sides into the oven (stove is brand new.) Hi still under warrenty get who sold this ...

...the oven igniter is weak and can not open the gas valve very much so hardly any gas flows resulting in a low flame size. By replacing the oven igniter the flame will be full size and heat quickly. ...

...oven has a gas hob and gas oven with seperate grill we had the same problem on our 10 yr old creda. gas man said new ffd required (flame failure device). he reckoned on around 80 pounds sterling for ...

...oven thermostat. So the question remains can the size of the pilot flame be adjusted? I am having the opposite problem with the pilot flame being too small so the gas valve opens but the gas will not ...

...gas oven. I have recently changed over to a gas range. When I got it I converted it to LP gas. Changed the four orifices that came with it. The top burners are fine but the oven flame is to big. The ...

...cheapest way is probably to replace the detector in the oven and if that does not work, replace the gas control device. Possibly there is contamination on the detector. Try cleaning it with wire

...oven and gas burners to bleed the gas from the system. There is a slot at the top of the stem. With a flat head ***** driver, turn the stem top 1/8 of a turn counter clockwise to reduce the regulator ...