Maytag EPIC MFW9600S "washer need drainage hoses" Questions

...need to open the washer to change the drainage hose. may someone help Please Access is through middle of unit. 2 philleps head screws, lift slightly and and it comes right out. Remove the two screws ...

...clothing fabric ect blocking drain line. The washer may have a built-in screen that is plugged. You may need to remove the back cover of the washer and inspect drain hoses for any kinks or

washer won't spin during spin cycle? Normally, your washing machine won't go into a spin cycle until it's been drained. The drainage hose may become clogged with debris from your clothing, or it could

washer? What do we need to undo to remove it from washer? Thanks,Angie You need to remove the two screws that hold the front panel in place. Remove the hose from the drain pump and pull it out through

clear, but still making noises during the drainage cycle it will need to be replaced. I found this at https://www.electrafixbc.ca/appliances/washer.html Check it out for more info on your washer issue

washer does not drain. The manual says to check the drainage hose for a clog. I disconnected it and water runs freely through it. I'm still getting the error message. What should I try next? Thank you

...washer is very old. im sure the drainage hoses will need to be inspected or replaced asap. i would also check the pump housing for cracks as well. make sure the water inlet valve assembly ins in good ...

washer won't spin out the water waher won't spin out the water This is a drainage issue. the spin cycle works in conjunction with the draining pump. they both work at the same time during the spin. if

...washer water leaks out of back plastic hose attachment when draining. How do we open top of machine? To get access to internals you have to remove back panel of machine and then other 3 sides that ...

...washer drain hose placed too far down into the standpipe. 2. You do not have the top of the standpipe sealed off. Placing the hose too far into the standpipe may cause the drain line to be sitting in ...