Question about Kenmore Washing Machines
...not to hit motor area around shaft when reinstalling pump clean motor shaft of as musch rust as possible do not tap new pump on shat if willo not push on by hand sand some more yes leak caused ...
...the new pump easily slides onto the motor shaft . Do not force it on , just easily slide it on . If you force it , the impellor will eventually wear thru the front of the pump , causing another leak
...pump from motor shaft. The motor and pump are removed from the machine and the three torq screws are also removed. your pump been leaking water and has the pump rusted to it ,,,,, if the clips are ...
removing pump and cleaning it, it's a commom problem with washing machine. it's possible your pump motor burnt out, two things you can do, to check pump, (1) two wires that you remove from pump motor,
Question about GE Washing Machines
...pump motor is turning. If you here just a low hum, then there is some object jammed in the pump preventing the pump impeller from spinning, or the pump motor is bad. to check, you will have to remove ...
...Removing the Electronic Assemblies. 3. Visually check that the P4 connector is inserted all the way into the machine/motor control. If visual check passes, go to step 4. If visual check fails, ...
Question about Whirlpool Washing Machines
...pump from motor after removing the clips and hoses. Why? Hi just read your posting.I have had this same problem at a customers house last week.Now the reason the pump doesn't come off is because the ...
...pump running? If not, see TEST #7. TEST #7 Drain/Recirculation Perform the following checks if washer fails to drain or recirculate. 1. See Activation of Manual Diagnostic Test Mode, and perform the ...
...pump and the pump then pulls off of the motor shaft. Look at the location of the belt for reference before removing the pump. reassemble and you are back in business. Thank you Please rate this ...
...removing the pump. If not for that, it would have been a 15-min, $20 repair.Because I felt it wise to replace the pump also, it was a $70 repair.#2Drive pump leakedIt took some trial and error but ...
54 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions