...fault code and then run a drain/spin to finish the load of laundry. If you detect no excessive suds, this fault code could be caused by a clogged drain system or a failed water level pressure
...code..... SUDS LOCK: The motor controller senses a suds lock condition by analyzing the current draw on the drive motor. If a potential suds lock is detected, the control tries up to 3 times to clean ...
...suds under control. You must only use HE soap and sparingly. Remove the bottom panel and open the cleanout. Wipe it down and flush it out. You will find the tech sheet in there. It will give you the ...
code You used to much soap, and also maybe the wrong kind of soap, these take a special detergent that is very low suds, otherwise you get this fault. Do not open a new question every time you answer,
...code will be displayed. Potential Causes • Check the drain hose and make sure it is not plugged or kinked • Check the electrical connections at the pump and make sure the pump is running. • Check the ...
...fault code... Sud fault code This is a Suds Detect error code. The following link explains the error and potential causes: http://www.fixya.com/support/r3608687-sud_error The number one cause of the ...
...fault code (F02). This does not necessarily indicate that you need to change anything at this time. When the machine senses too much suds, the error code is displayed, when too much suds are actually ...
54 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
