Karcher 2500 PSI Pressure Washer "power stops trigger release" Questions

...power washing, I release the trigger to stop the spray and the spray won't restart when is compressed. I need to shutdown, let sit and then restart. It's a karcher PW with gas engine. This has ...

...trigger, the water pressure builds quickly and overcomes the power of the engine shutting it down. Here is the manual for your machine, ...

...power washer stops while spraying then couple minutes later turns back on. Very frustrating and makes job take twice as long. I know it suppose to do this when trigger released but does it while ...

...trigger gun to commence use of.I`ve Sudden loss of power to my pressure washer while using it. MAKE AND MODEL VAX VPW4.Fuse to plug changed to no avail. Hi try cleaning the lance with descaler, these ...

...release the trigger and the pump should stop, it cycles switching itself on and off consistantly - any ideas? i cannot find this model on your list? The machine has a pressure leak. Check for a ...

power is switched on, it makes a loud pulsing sound. As soon as I pull the trigger on the lance the noise stops and seems to workOK, until I release the trigger and the noise returns. sounds like your

...trigger. I have replaced the hose 3 times because the pump continues to pump until it blows the hose. The pump will not stop pumping! You have a defective pressure release valve or someone has ...

trigger is released. Model HD1600 features a chemical solution reservoir with a similar screen; clean this screen in the same fashion if you experience chemical intake issues. More to Consider If your

...trigger the engine dies Make sure thre is no air lock in the system line. So first of all use a clean line to wash off and blow out any dirt in the spray gun. make sure the engine is having good fuel ...

...stops running. Runs fine as long as trigger is depressed. What could cause this? When the trigger is pushed, the engine is supposed to rev up to increase the pressure. So from the description, is ...