Frigidaire FAC126P1 wall/window Air Conditioner "220 wireing red black white" Questions

220 between the red and black, the White is available for 110 to drive a fan or whatever. - 220 sometimes only has 3 wires: Red, Black, and green Here you have 220 with no 110, like a baseboard heater

red=low speed white/brn=common or white . brn/white=line 2 leg of 220 volt.110volt furnace is black to black=cool speed blue unused(tape/wirenut end)red to red=heat speed white/brn to white=common brn

...220 Volts you need a black, a red, and a green. If you have anything IN the unit that needs 110 (probably not), you need black, Red, White and Green (bare) #12 wire. Definitely needs to be on a ...

...The units red and black go ont other side. You connect the neutrals and ground it and you are in business. Don't guess, because you are fooling with 220 Volts AC which will knock you

...220/110 (7 wire)motor. The new motor has P1 (line 1) T8,P2,T3 (insulate) and T4,T2,T5 (line 2) What goes to red, goes to black and goes to ground. This is very simple, but you need to make sure you ...

red, blue, yellow and black wires. The transformer has green, blue, orange and white wires, what goes with which one. pls on the transformer is writing each wire color to the corresponding voltage you

...220 volts. Which motor are you checking? If your unit is a gas unit, then its 115v and if its and electric unit 220v. If you are getting voltage to the motor, 115 to ground but the motor isn't ...

...220-230 V ac motor black and white are both hot legs On the lable on the side of the motor there is a diagram that tells you what wires go where. The 2 brown go to a capacitor. if there is a red and ...

...220 volt wires.Black and purple will be your 2 hot wires.You can connect either one to the old capacitor on the fan terminal and the other to the load side of the contactor, so when the contactor ...

...220 volts to run the motor. Look on the new motor and you will have a diagram or on a paper that comes in the box. The old motor used the dual cap to run the compressor to. The green is just a ground ...