Hotpoint wf840 displays "test" When I try to run a cycle, the machine displays "test", goes through the test then displays "on", and then when I try again it just does the same thing. Help! please. ...
Hi, I have a hotpoint, wf840, F-12 keeps flashing on the screen, any ideas what to do ? thanks hotpoint f12 means water is off.???????? cheers
Question about Hotpoint Washing Machines
Hotpoint WF840 LED Not illuminating, machine works fine. Do i have to replace the led panel or is it something else? should be change led only by an expert
hotpoint ultima switched on power and have nothing to washing machine the code on my hitpoint wf840 this code keep flashing f-01 i dont what this means could you help me please. we want electric ...
hotpoint wf840 displays h20 all the time This is indicating a problem with the water supply to the washer. Check inllet hose/s, make sure they are not kinked or restricted , make sure tap/s are fully ...
hotpoint ultima wf840 drum jammed display saying error code f 02 can any 1 help Error F-02 is a slow drain problem. Undo and remove the wide tapering pipe from the bottom of the drum to the pump. ...
WF840 is flashing H20 what is the problem machine cant take in water, if you hear a quiet hum when a programme is started that will be the inlet valve opening, check the inlet hose isnt kinked, the ...
i have a hotpoint wf840 everytime i enter a wash cycle it just says test and performs a spin cycle whilst test still comes up on the screen is there anything i can do other than buy a new washing ...
displays F-03 my wf840 keeps displaying F-03 and sends water through but no cycle can be started. NTC fault its electronic and needs engineer But try this for most electronical faults first switch off
hotpoint wf840 fault (F-02) please help do u know what tis means? try checking motor - module connections -brush - tacho on the motor
139 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions