Question about Hotpoint Washing Machines
cycle was stuck at 1 minute, so I hit pause/cancel and "INT" appeared on screen. I tried to restart, tried to cancel, tried to open door. Nothing is working. Unplug machine, wait 2 minutes and re-plug
Question about Hotpoint Washing Machines
...cycle cant open door programme not finished Try the following, may work: Press the Start/Cancel button together until all the console Led's illuminatePress both Start/Cancel and On/Off buttons ...
Question about Hotpoint Washing Machines
cycle gets stuck on "wash" and continues like this until cancel button is pressed and I then have to select rinse/spin program button to complete the wash. before it use to wash/rinse/spin all in one.
...front loading washer. Stuck on 1 minute left on cycle but I cannot cancel or re-start the machine. Door can open (I have removed clothes already) unplug it about 5mi plug back in that should clear ...
...cancel out. The time left in the cycle just keeps flashing. We cannot cancel the wash and holding the start button will not work either. The cycle time just keeps flashing. We have poured 1 liter of ...
Stuck in wash cycle Washer starts normally starts wash cycle then the control panel makes a buzzing noise and will not progress. Canceled and used 2 minute cycle to empty washer. Ran diagnostics ...
cycle, stuck at wash after time end! Stuck in wash mode, won't move onto rinse and spin. No fault codes displayed, just reaches 1 minute during wash and continues to tumble until manual cancel. Rinse
Question about Washing Machines
...cycle, to cancel it, it will cancel, then gets stuck at 1 minute left. Before all this, there was an error H20 displayed, but have managed to solve this and the error no longer displays, however the ...
...cancel or after unpluging - one year ago the customer service for whirlpool gave us the code for a series of buttons to push to cnacel the "FL" alarm and continue with a normal wash cycle - ...
...cancel the cycle. "FL"Flood Condition "FL" flashes if any overfill condition occurs. This condition occurs when excessive water in the tub causes the overfill switch to trip. The control must realize ...
139 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions