Hotpoint Aquarius WD63 Front Load Washer/Dryer "drum dryer hitting sides" Questions

...slowly to see if a screw is standing up on drum. If its a whirpool dryer with the lint filter inside the door, the top cabnet is dented down, hitting the drum. someone sat on the top, bent it

drum to hit the sides and move the machine. The drum is obviously off balance, but it will not get in balance no matter how I rearrange the clothes inside. I have a whirlpool top load washer. The drum

...drum seems to be moving freely side to side, and is hitting the sides of the washer even with a small load. Are there shocks that can go bad in a washer? YOU HAVE RUBBER WHEELS THAT RIDE ALONG THE ...

...lot Hi, your washing machine makes noises because all the clothes and other materials are not balanced evenly--one side is heavier than the other--causing the drum to hit the sides of the washer

...hitting the machine with a hammer ! The other short term spin cycles sound mormal. Go figure? Something is causing the drum to be way out of balance. Does it bang and make noise when it's spinning ...

...dryer. The washing machine is making this noise when switching cycles (I think) - is it possible that change is stuck under the centre "agitator"?? It's likely from an overfilled load where something ...

drum spinning making noise. check point of noise , is this on hitting the sides , or from the motor, any foreign objects or the drum spindle. But you are the judge with a first view. Use good lighting

...heatman101 this sounds like its well out of balance there are steady springs on the drum to stop the drum flying about if a sprin has come off or broken the brum will "hit" the side

...the tub. Try spinning the dryer tub with your hand. If you notice that the drum cannot rotate freely, I suggest consulting a professional for an accurate diagnosis and to assist with the

...drum agitator shaft and fittings must be checked. Also the suspensions which include the shock absorbers and springs, the body clamps must be checked to be in correct alignment and not changed ...