Hotpoint Aquarius WD63 Front Load Washer/Dryer "wd440 rinse hold" Questions

Ad

Question about Hotpoint Washing Machines

2 Answers

...wd440. when switched on the on/off flashes and the drying and rinse hold flash. press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...WD440 Partly through a cycle the on/off button and rinse hold buttons flash continuously preventing programme completing. Also water is leaking from the machine u might have a blockage in the ...

Ad

Question about Hotpoint Washing Machines

7 Answers

...WD440 and the on/off button is flashing and the rinse hold button also. when I unplug it and plug it back in the lights look fine but the drum is stuck, I have cleared out the filter at the back but ...

Wd440 not spinning fast. Drum rotates when washing and rinsing but as soon as fast spin comes on machine cuts out and on/off button and rinse hold lights flash. Machine us draining ok and I cleaned ...

Question about Hotpoint Washing Machines

1 Answer

...WD440 1400 Spin Machine not draining water, and lights including the on button flashes continually. I have checked the actual drain horse not blocked. Manual does not seem to help. There has been an ...

WD440, Rinse Hold, Time Saver and On/Off light flashing My machine occasionally freezes. It usually occurs during the final spin stage - and the machine can only be reset by unplugging it. I've spoken

Question about Hotpoint Washing Machines

1 Answer

...WD440 and im getting flashing lights. The on/off light blinks fast and the drying high heat, rinse hold and time saver lights all flash??? So thats lights 1 3 and 4 please help! Check first the ...

Question about Washing Machines

1 Answer

...WD440 has a fault: Rinse hold & Time saver lights flash continuously along with the power on/off button. Water runs into the soap tray but straight out the machine without going into the ...

...wd440 washing machine stopped half way through spin,wash,rinse and spin,rinse hold and time saver lights are on but nothing else is happening at all It may be an electronic issue.  To reset, ...

Question about Hotpoint Washing Machines

1 Answer

...WD440 Wash / Dryer. When switched on at the mains electricity the "Rinse Hold, Reduce Creases, Drying Heat, time saver, dry and on/off buttons all flash for approx 5 mins, then the lights go off ...

Not finding what you are looking for?
Hotpoint Aquarius WD63 Front Load Washer/Dryer Logo

589 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...