EliteGroup V7.5A (K7SOM+ V7.5A) Motherboard "hdd powers spins stops spinning" Questions

...duo 2.33 ghz i use corsair PSU 400wtt and ram 2.gb corsair 800 mhz with out any further install of hdd i try to boot up in the bios setup but.. when power is on the CPu fan spin.. up and then stop ...

...stops immediately. I think its a motherboard issue. Can you provide some trouble shooting suggestions? Use jumper to reset cmos. Test or replace cmos battery.Unplug evthing( HDD,CD,DVD,FLoppy) try to ...

...spins a little then stops when the power button is pressed power light and hdd light stays on. tried changing power supply, ram and harddrive. also tried resetting cmos Did you remove the components ...

I replaced my hard drive, and upgraded my cpu and in the process of replacing them had issues with my Power SW, Power LED and H.D.D. LED wires. I seemingly figured it out and powered up the computer ...

HDD and listen. It it whine-starts, it's a fair sign. 5. Try a different monitor while you test these. Let us know what you find in clear detail. In addition to advice from Solution 1 the MB I had was

stop. Everything seemed to run normaly (case fans,GPU,DVD). Doesn.t react on restart and power off, HDD led is on all the time. XP-64 MOBO Gigabyte GA-X38-DQ6 Intel Core 2 Extreme QX6850 GPU Quadro FX

...HDD are not set to slave. Try a different SATA channel (or IDE channel) on the MOBO. Try different molex to power the drive up. Hold the drive when it is connected, does it hum indicating that the ...

...spins up. Try different power lead and different SATA cable. If possible, try the drive in another machine to make sure it isn't 'Bad out of the Box'If the drive does not show up in BIOS its a ...

...HDD spinning sound. However there is no POST beep or anything else. The monitor exits the sleep mode (the light turns on but nothing appears on the screen). How can I detect the problem? Hello, There ...

...same problem. again it will start after 2 days for 1 time until i shutdown. i check smps, ram, HDD all is working. plz help me. You can find a lot more help- info about that in the forum of