...stitch length, the feed dogs regulate the distance the material is advanced between stitches. Also, make sure the pressure foot is applying enough pressure to keep the material in firm enough contact ...
stitch regulator, not the Juki - right? Use a carpenter's level to level up your frame, and be sure to keep the quilt leveled up to barely above the throat plate on the machine, and level front to
Question about Brother Sewing Machines
...Sure stitch Regulator if it will work on a Brother1500 or is it meant for a Juki? Brother 1500 Sewing Machine vs Juki 1600 machine I do not know but here you can find one: Amazon com Grace Frame Sure ...
Question about Juki Sewing Machines
...Sure Stitch regulator. I can quilt for approx 30 seconds and then the needle thread breaks. I've adjusted the tenion in the bobbin, changed needles, adjusted the stitch length on the Juki, as well as ...
Question about Juki Sewing Machines
...sure!). This has NOTHING to do with your timing. If your machine made good stitches before you change the feed dogs/plate. It should make good stitches after you change it. Timing is all to do with ...
skips a stich or it will make the right size then go smaller. Do you think the feed dog needs to be replaced Does the stitch regulator screw in place. Make sure it is tightly in the position yopu want
...sure that your feed regulator is set properly. It can very well be a mechanical problem check to see what happens when you engage the reverse. Do the feed dogs move front to back and up and down at ...
Question about Janome Sewing Machines
...Sure Stitch Regulator. The machine I was using before on the frame was a Janome 6600 with the Sure Stitch. On both machines I've been using Valdani 50wt. thread in the top and bottom. My problem. the ...
...sure stitch not working installed Grace sure stitch to base and machine. Both are older than 2008. Regulator LED lights up, but does not sew. Are there any adjustments I can make? Thanks in advance ...
sure stitch regulator of quilting I am having irregular stitches on the forward/backward motion. I am using a Janome 16000 P on a Gracie II frame. (I purchased this as a used productin a private sale)
159 questions posted
Usually answered in minutes!
204 Questions
101 Questions
98 Questions
27 Questions
20 Questions