Question about Elna Sewing Machines
...wont cut My elna 792d wont cut but chew fabric,I've not used it heaps,I did rolled hem & when i put it back to normal 4 thread overlock it wouldn't cut anyone suggest anything I was told to oil the ...
wont my overlock cut probably because the blades are blunt and out of adjustment. They are only mechanical scissors that rub each other and like ordinary scissor they become blunt. Most shops the sell
thread wont overlock the knife cuts the thread, but the top needles won't engage and create the overlock stitch. the thread on the upper needles constantly breaks and i've rethreaded everything 3 ...
overlocker the blades wont cut where can i but new blades You may be able to find a replacement blade. Search the internet for: Make + Model + the word "blade" or contact manufacturer support. Most of
...overlocker so you do need to adjust tension for each new project. For example, if seaming a jersey knit you'd use a four thread seam, this gives elasticity and strength and you can join two ...
I cannot get the tension right? Also, trying rolled hem with 3 needles...tension too loose. Rolled hem would be one needle and two loopers, is this what you meant? Make sure you move the blade to ...
Question about Sewing Machines
...overlocker wont cut at all. I did some rolled hem but since resetting everything for regular serving it's like there is no knife at all. Help I've had that happen on my serger, it's not the same one, ...
Question about Janome Sewing Machines
...wont cut. Do I need to replace the knife? more than likely as the knife blade would have been damaged and blunted Are you saying the knife still functions but it is not cutting the fabric? If so, the ...
125 questions posted
Usually answered in minutes!
111 Questions
75 Questions
56 Questions
44 Questions
29 Questions