Kirby Ultimate G Bagged Upright Vacuum "put hose back hoover model" Questions

put it together and it is missing pieces. The pieces i am missing are the ones that go in the hose box. I didn't take it back to K-mart because it was the last one and this is the one i wanted Contact

...put too much slack in the hose (by moving the clamp too far), as the hose can also bunch up due to being too crowded when the handle is upright.

Inspect the hose and the tape whenever you use ...

...put the bag cover on then turn it on again. If it overheats and shuts off then you may have a clog on there somewhere restricting the airflow. If so check the power nozzle area, the hose coming from ...

...put the block on the end of the hose in the slot on the front of the tank. When down however, put that block you took out back, or your cleaner won't work right. ...

...hose, then while holding it all, and put the gray retaining cover back on. Sounds more difficult than it really is. If your not mechanically inclined take some pictures as your ...

...hose can be held too. If enough pressure, it will blow the dirt out. Make sure to put a plastic bag around the loose end to hold the dirt. Visually check wands and power nozzle. The bend in the power ...

...put it back into the steam vac and I still have no suction. I have checked many times to see if I replaced the recovery tank correctly and it is correct. I am wondering if there is something else I ...

...put the lid on the recovery tank, you have to be sure that the front of the lid is properly engaged into the two tabs on the top of the tank. With the lid installed, if you can lift the front of the ...

...put it back on, it must hinge on the front tabs of the tank. Problem #2 - My Steamvac is still not Sucking! Right now you are thinking that you shouldn't have let your brother borrow your Steamvac. ...

...hose assembly, and may not have been put back in place. It is a square plastic piece, about the size of a slice of sandwich bread, which slides into the front of the tank. A less common problem is ...