Kirby Ultimate G Bagged Upright Vacuum "drive pedal" Questions

drive pedal kirby drive pedal You will need to remove upper cover ,then remove the three screws holding the trans in. Slide out the old drive pedal reuse the cam arm and install new pedal. Slide trans

...drive pedal I just re-installed the neutral/drive pedal (fell off) and now the vacuum drive rolls backwards HELLO, JUST USE THIS GUIDE! ...

...drive unit. The N/D pedal has two parts - the pedal itself, and the shift cam. Observe carefully how these units fit together. After installing the new pedal and replacing the screw and washer to ...

...drive pedal? Here is a step by step walk through with pictures on how to replace the neutral / drive pedal on any Kirby Generation vacuum (G3, G4, G5, G6, Ultimate G, Ultimate G Diamond Edition, ...

...pedal to go from drive to nuetral on my G series fell off and i cant seem to get it back in The pedal assembly must be replaced,( part # 558401S), as it has a gear pressed to it which has come loose. ...

...drive/neutral) The pedal assembly must be replaced,( part # 558401S), as it has a gear pressed to it which has come loose. The handle, switch plate, and upper motor cover must be removed first. To ...

...drive pedal The neutral drive pedal fell off while vacuuming. There is a pedal and a small metal ball. I can't tell how to put it back together again. this is the Exploded Parts Diagram. ...

...drive unit. The N/D pedal has two parts - the pedal itself, and the shift cam. Observe carefully how these units fit together. After installing the new pedal and replacing the screw and washer to ...

...drive unit. The N/D pedal has two parts - the pedal itself, and the shift cam. Observe carefully how these units fit together. After installing the new pedal and replacing the screw to secure it, ...

...drive pedal just fell out so I figured I would give it a shot to see if I could fix it and quickly figured out the 3 screws in the bottom plate for the drive unit wasn't the answer. I was able to ...