Life Fitness T3 Treadmill with Advanced Console "motor belt won 39" Questions

...All lights lit. HAPPILY WALKING ALONG AN THE MOTOR JUST STOPPED. aLL OTHER CONTROLS STILL WORK. jUST THE BELT AND MOTOT WON'T FUNCTION.iS THERE A PART ON THE POWER SUPPLY THAT HAS BURNED

...belt motor, for worn or crack, or adjust if is possible 4) Test the input voltage motor, if there are the motor need repair 5) Test the output voltage board, for input voltage motor, if there are NOT ...

...rotating on metal then it could be a a(roller bearings or b( motor bearings. LUBE  INMEDIATELY. + DECK BELT LUBE VERY URGENTE, MAYBE YOU HAVE A WORN DECK TIME TO CHANGE THE BELT.God bless ...

...belt won't move? Step 1:please see the video and lube too the rollers bearing. Happy new year and God bless you Step 2:test the input voltage motor, if there are voltage in the motor, the ...

belt and replace it if necessary and tight   3) tes the input voltage motor, if there are the motor need repair or replace  4) test the output voltage from main board, for input voltage

...belt, this happen because the electronic system protect the system and shut down.the cause is deck worn.2) Lube the rollers bearing too.3) Measure the input voltage motor, if there are the motor need ...

...won't move, the board works Motor may be disconnected or defective. Contact Bowflex for troubleshooting assistance, or they can provide an electronic copy of a service manual with ...

...belt won't work Adjust the reed switch as indicated by the diagram by 1/8- 1/4". Run the calibration software instruction under the Hood motor or see your user manual.sincerely.ernesto ...

...t start my treadmill life fitness 9100HR won't start Have you checked the drive belt @ the motor, if it is OK then check the fuse, if it is ok then the brushes in the motor may be worn ...

...belt and replace it 3) Measure the input voltage motor, if there are voltage motor need repair or replace 4) test the output voltage from main motor board, if there are NOT the board is ...