Life Fitness T3 Treadmill with Advanced Console "start error" Questions

Ad

Question about Exercise & Fitness

1 Answer

...error you have to put the safety key in start it it and wait for it to say E7. Now press stop and incline( up) together and hold for 20 seconds. Your treadmill will start to incline up. Take out your ...

Ad

Question about Life Fitness Exercise & Fitness

2 Answers

...Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it ...

Ad

Question about Life Fitness Exercise & Fitness

1 Answer

...start its show on error 3 motor not run plz give me soliton thanks Hi, error 3 means the waking belt starts moving without any command. Make sure that you are not moving the belt manually before the ...

Question about Endurance Exercise & Fitness

2 Answers

...at start, belt doesnt start after countdown? error 1 simply means no belt movement generally. If belt moves a little it could be the speed sensor but generally it's the motor controller. error ...

Question about Exercise & Fitness

3 Answers

Error message E1 while starting my trojan interactive platinum treadmill itdisplays E1 error with in 10 seconds and motor doesn'tgetstarted. Asa matter of fact I shifted this machine from one house to

Question about Life Fitness Exercise & Fitness

1 Answer

...error message When you start your work out on Life Fitness Treadmill T3 it won't start and displays a "Fet error message" What would cause that? The FET error message is caused by the driver ...

Question about Matrix Exercise & Fitness

1 Answer

...stays up on the and the treadmill will not start hi, Here i have added the list of error codes list for t5x . Check the same and confirm which error its shows. error 02A0 is not listed any where. ...

Question about Precor Exercise & Fitness

1 Answer

...Start Up - Error indicates that the display has sent a command for the drive motor to start, however, the speed sensor has not returned the signal acknowledging that the drive motor has started. ...

Question about Exercise & Fitness

1 Answer

...Free May 21, 2015 - If the running belt stops after 6 seconds of starting the treadmill, this may indicate that either the ... If there is no belt movement, or you ...

Question about Precor Exercise & Fitness

1 Answer

...start it I get the belt error. I removed the drive belt from the motor and reset the error codes (20,22). Still get errors. I can see 150VDC for a couple of secs when I disconnect the motor lead and ...

Not finding what you are looking for?
Life Fitness T3 Treadmill with Advanced Console Logo

76 questions posted

Ask a Question

Usually answered in minutes!

Top Life Fitness Exercise & Fitness Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...