Jura Capresso Impressa S90 Espresso Machine "remove boiler thermoblock" Questions

...boiler with a screw - again use the Newelectronx security screwdriver to remove the security screw. 9. The thermo sensor connects to the electronic board. Detach the wire from the electronic board. ...

...boiler as no water is going through to cool it. Before this happened, I run 3 cups of coffee but stopped it prior allowing coffee to RUN through system (this was to clear some old beans) Any ideas? ...

remove and descale the thermoblock boiler and the copper pipes to them. This problem is the more difficult to be performed however if the water you have use was very hard then this is the most posible

remove the filter basket,and looked at the bottom where there is a small spring action "thing" push that up and down and that allows the coffee to then flow into the carafe, that spring action "thing"

...thermoblock. Today I fixed mine krups ea8108 by changing the heatblock NTC... With a 3D printer NTC 100K ohm.... I just screw the new NTC together with heat blow fuses... See pictures... NTC can be ...

...thermoblock that could be blocked? I haven't opened up the machine again to have a proper look. I'm thinking about replacing the pressure valve with a new one as I guess it needs to be able to travel ...

...remove waste container and tray. Put the waste container back in without the tray and slide a knife under the waste container, close door. Plug in. It should reset. Turn off, replace tray and waste ...