Does the check engine light come on when you put the ignition on on 2010 xyalo 2.5

I, feel sorry for you, after reading your problem, but don't worry you visit the
Reliable-Store they will help you for sure.
Ford explorer 2010

Mostly no. The engine check light is for emission-related faults but to be certain I suggest you check your vehicle handbook. Mostly there is a service indicator to warn when oil service and routine maintenance is needed.

I have heard some vehicles have an engine check light that is triggered by a low oil level but only because the engine management puts the engine on a reduced power programme when the oil level is allowed to become low.

I would check for fuel pressure. If it was the security system your security light should be lit.

Recall ID # 103891 - ELECTRICAL SYSTEM:IGNITION:SWITCH Hide Details Recall Date:
JUN 26, 2014
Model Affected:
2008 Dodge Grand Caravan
Summary:
This defect can affect the safe operation of the airbag system. Until this recall is performed, customers should remove all items from their key rings, leaving only the ignition key. The key fob (if applicable), should also be removed from the key ring. Chrysler Group LLC (Chrysler) is recalling certain model year 2009-2010 Dodge Journey vehicles manufactured June 29, 2007, to June 17, 2010, and 2008-2010 Dodge Grand Caravan and Chrysler Town and Country vehicles manufactured January 26, 2007, to June 17, 2010. Road conditions or some other jarring event may cause the ignition switch to move out of the run position, turning off the engine.
Consequences:
If the ignition key inadvertently moves into the OFF or ACCESSORY position, the engine will turn off, which will then depower various key safety systems including but not limited to air bags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or increase the risk of injury in the event of a crash.
Remedy:
Chrysler will notify owners, and dealers will modify the ignition switch, free of charge. Chrysler sent out an interim notification to owners on September 11, 2014. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is L25. Note: This is an expansion of recall 11V-139.
Potential Units Affected:
525206
Notes:
Chrysler Group LLC
Read more: http://www.motortrend.com/cars/2008/dodge/grand_caravan/recalls/#ixzz3IyMr8j6h

Although I have never encountered this issue on my own 2010 Forester, I would say that this may be a fuel system problem with a sensor or component. The place to resolve this is at a Subaru service department.

Engine Light Is On: 2010-2013 Kia Forte - What to Do - 2010 ...

www.carcarekiosk.com/...Kia_Forte_EX...engine_light/diagnose

A check engine light can indicate a broad spectrum of problems with your 2010 Kia Forte. ... The video above shows how to locate the on board diagnostics (OBD) plug on your 2010 Forte, how to read the trouble codes and how to reset or clear the checkengine light using a scanner on ...

KIA Check Engine Light (CEL) Codes - Kia Forte Forum : Sedan ...

www.forteforums.com/.../11832-kia-check-engine-light-cel-codes.html

May 20, 2012 - 15 posts - ‎8 authors
Old 05-19-2012, 08:42 PM Thread Starter. SketchedOut ... KIA Check Engine Light(CEL) Codes ... P0115 Engine Coolant Temperature Circuit Malfunction. 2012 Forte Koup: Check Engine light
13 posts
Jun 29, 2015
Automatic Transmission Shifting Harder Than Usual
13 posts
Apr 27, 2014
Check Engine Light + P200A code on new 2011 SX
15 posts
Jun 7, 2011
Oil filter caused check engine light?

Any car produce after 1996 can be scan with an OBDII reader.

Check the date code on the battery to rule out old battery.
All battery has a service life of 48 or more month.

Also check the belt tension. When the 2 arrow / dot meet the it is worn.

A worn tensioner will not create enough frication to the alternator pulley.

1. So the car was running normally and then on one occasion you put in the key to start it and all the warning lights flash up on the dash and the starter motor will not turn the engine over. Is that correct.

2. When you last drove the car were any warning lights appearing on the dash.such as check engine warning, engine overheating, electrical charging warnings etc.\

3. Has any work been carried out on the car recently.

4. How old is the battery in the car.

The following procedure will reset your oil change light. Thank you for using Fixya!

2008-2010 Sable

1. Turn the ignition to run (one position before starting engine).
2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.