1998 Nissan Sentra Logo

Related Topics:

Posted on Oct 31, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Rpm drops down when acu is turned on

Whenever the thermostat of the acu turns on the rmp drops down

  • orestesmanio Oct 31, 2008

    im sorry but my discription is incomplete, acu is running but when the car stop the rpm drops down. the rpm rate is unstable to a certain level. hope you could help me with this, thanks a lot

  • orestesmanio Oct 31, 2008

    im sorry but my discription is incomplete, acu is running but when the car stop the rpm drops down. the rpm rate is unstable to a certain level. hope you could help me with this, thanks a lot

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,586 Answers
  • Posted on Oct 31, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 21, 2008
Answers
1586
Questions
0
Helped
821387
Points
5018

Are you turning on the compressor (as in turning on the air conditioning) or just the vent? If you're turning on the compressor and the revs drop, that's normal. The compressor is driven by an engine belt, and when it is turned on, it puts additional drag and load on the engine, causing the revs to drop.

  • Anonymous Oct 31, 2008

    I'll do some digging and see what else I can come up with. Do you realize that throwing an "inappropriate" rating on the answer makes my ratings average on here take a decent hit and also harms my chances of getting paid on Premium solutions? It kind of sucks because an inappropriate rating would be justified if I told you to refill your washer fluid tank or something like that. If the info wasn't complete to begin with, it's hard to see how that is justified.

    Anyhow, I will think it through and do some digging and I'll get back to you on this shortly.


×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2006 pt cruiser, we changed the thermostat, doesnt overheat all the way but in idle it rises, as long as the rmp gauge is up to about 2 it goes back down until we let of the gas. Pls help!

At idle the water pump turns slowly as compared to when the engine is running at higher rpm. I believe the water pump has lost efficiency, probably due to corrosion of the impeller. If it were mine I'd change the water pump and quite possibly switch to a different type of coolant. Never ever use tap water in a radiator, Always use distilled water in the gallon jugs. They're about 99 cents each at the grocery store. Minerals in tap water calcify and clog the small passages whereas distilled has no minerals and doesn't.
0helpful
1answer

2009 Audi A4 loud engine startup sound & shake

probly need new motor mounts--also a dirty throttlbody can hav the same effect--u can cleanit with a nonchlorinatd solution
0helpful
1answer
0helpful
1answer

Golf 2004, 1400 CC , Car keeps turning off.

shonds like an electrical short caused by clutch engagement check wires going to you engagement switch at clutch or by you gear shift housing
0helpful
2answers

Heat only works at 3000 rmp after car has come up to temp. If rpm drops below 3000 heat temp at vents will drop. Have changed the thermastat with no positive results. Temp gage has shown a quicker rise in...

Is the coolant level ok? After replacing the thermostat, did you bleed the air from the system? The bleeder should be at the front (on engine near radiator). Low coolant level, or air in the system can cause what you describe.
3helpful
1answer

1996 toyota corolla rpm drops when a/c or lights is turned on

There is a solenoid that is mounted on the carburetor that increases the idle speed when extra strain is put on the power supply (a/c etc). Usally it gets dirt in it and jams which can cause it to burn out. A spray with a CRC type product and giving it a wiggle will usally get it going again.
0helpful
1answer

RMP drops

you may have a vacum hose not connected for it to stop and not idle
when you turn the a/c on it has a sevo operating the thottle to give it more revs so it doesnt stop
maybe you just need to increase the idle screw a bit
1helpful
1answer

1997 Jeep Grand Cherokee Stalls when put in gear V8

Replace the throttle postioning sensor, and mass air flow sensor
0helpful
1answer

1995 Mercury Villager shots down when i step on the break.

Be sure to ALWAYS have more than 1/4 of gasoline in your tank, this may be caused when having it below that. Also having less than 1/4 could damage your fuel pump wich is an expensive part, so it's good on taking care of it.
0helpful
1answer

1985 FORD F150 RPM DROPS-TRUCK SHUTS OFF!!

run a fuel injector cleaner?

carburated or fi?
Not finding what you are looking for?

147 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...