20 Most Recent
2006 Cadillac SRX - Page 2 Questions & Answers
I changed spark plugs and changed cylinder #1 on
How do you change a cylinder? That's generally a major machine-shop overhaul on non-aircraft engines, and you should have serviced rings and bearings for all of the other cylinders as well.
I assume you meant you did something else on Cylinder #1. Did you mean you changed the spark plug cable, or was it the fuel injector? Note: if you mixed up spark plug cables, you will have at least two plugs firing at the wrong time. This will make the engine run poorly, if it runs at all. Look for a sticker somewhere in the engine compartment showing the firing order, and verify that each cylinder's spark plug wire is connected to the corresponding terminal on the distributor or coil pack.
How to get to rear seat driver's side fuse box?
Open the rear doors
Follow the carpet to the bottom of the rear seats.
You will see staples along the carpet. (This is to adhere Velcro to the carpet.)
Separate at that seam.
Reach in and pull the carpet forward. The Fuse boxes are long narrow black boxes.
(its tight and you have to use some force to pull the carpet back.
Fuse boxes are located on both the driver side and passenger side.
Good luck!
How do i remove the eng
you are most likely dropping whole front engine motor and tranny on frame onto a support table or jack stands and before you do that get torque converter bolts out first you mite need to take oil pan off to get motor to turn you have one big job good luck
Not finding what you are looking for?