Jensen Hunter S FLM002 - Popular Questions, Answers, Tips & Manuals - Page 7
How do I change the voltage regulator on a 2005 r1200 cl boxer
Swapping the voltage regulator on a motorcycle can be tricky, especially on R1200 CL Boxer. Here's the thing: It involves electrical work, and that can get risky if not done carefully. There's a chance of getting shocked or messing up the wiring. The regulator connects to a bunch of wires and parts, so you need to know how to take things apart and put them back together right. If you're handy and have a repair manual for your bike, you might be able to tackle it yourself. But if you're not super comfortable with electrical systems, it's best to leave it to a pro. A qualified mechanic will have the experience and tools to get the job done safely and make sure your bike keeps running smoothly.
3/20/2024 3:32:37 AM •
Cars & Trucks
•
22 views • 0 helpful votes
How to access the motor of a Rainbow D2 vacuum cleaner in order to clean it?
Immediately after using the Rainbow, remove the water basin and pour out the dirty water through the air intake opening. Heavier particles will settle to the bottom of the basin as the water is poured. Once water is poured, remove the remaining heavier debris and dispose. Then wash the water basin with soap and water.
That was not a useable answer [looks to be easy] Just how is that answer going to solve the problem of removing 2 screws from license plate fixture to change bulb.
This appears to be aimed at me. I have answered this 3 times in 2 days to you and someone posting as Anonymous. I thought you missed them.Making a new post as a follow-up doesn't work on Fixya because are threaded to poster. This should have been under one of my answers by clicking 'Comment'.If the screw heads are chewed up, use a screw extractor. It is just 2 Philips head screws, unless a previous owner has changed them? If access is a problem I have a neat Cranked Screwdriver, the handle is right angled to the bit point. It was easy, because the videos showed it to be easy.Worst case scenario, smash it off, use locking grips on the remains of the screws and replace the whole unit.You could also wire in a couple of LED units left and right of the old one...
3/25/2024 7:11:00 PM •
Cars & Trucks
•
20 views • 0 helpful votes
Found a hole along side the foundation on my house, about 6 inches diameter and at least 18 inches deepwhat should I do?
It depends where you live, but at that size and if you see spoil that has been dug out it could be racoon, fox, rabbit or groundhog getting out of the cold. It also depends if the hole is vertical or horizontal. If vertical, it could be a sink hole or subsidence. It is one of those things where a picture is worth a thousand words. You can refill the hole with the soil and see if it gets dug out again. For a more permanent solution fill with concrete.I trust the snowman got sorted out...
3/13/2024 4:26:53 PM •
Cars & Trucks
•
24 views • 1 helpful votes
Danza D500044 water control square cover, how to take it out? Should the small switch arm take out first?
Turn off the water supply to the faucet.
Remove the handle by loosening the set screw with an Allen wrench and pulling it off.
Remove the escutcheon plate by unscrewing the screws with a Phillips screwdriver and sliding it off the valve stem.
Remove the water control square cover by prying it off with a flat-head screwdriver or a small knife. Be careful not to damage the cover or the valve body.
You do not need to remove the small switch arm, as it is part of the valve cartridge.
Not finding what you are looking for?