Jensen Hunter S FLM002 - Popular Questions, Answers, Tips & Manuals - Page 5
Having error code u110c with up522 and p155. Instruments go whacky fuel Guage always on e locks go up and down . Help
u110c This is a communication failure between the BCM and the PCM on the fuel level bus line. There is either a open in circuit between the BCM and PCM or faulty BCM. This requires the use of a special tool to test BUS line for an open in circuit.
The P0155 code occurs when the Power Control Module (PCM) tests the upstream heated oxygen sensor's circuit on Bank 2, or one side of a V-configured engine like a V6 or a V8, and detects a short in the circuit or too much resistance in the heater circuit
take car to repair shop
3/18/2024 8:18:56 PM •
Cars & Trucks
•
25 views • 1 helpful votes
Why is scania not starting,dashboard no display but vehicle cranking
For the dashboard check you fuses. Sometimes it is that easy.
You will need to repair the dashboard lights to find out if there are any warning lights showing. We're there any warning lights before the dashboard lights stopped working?
What exactly does it do when you crank the engine? Just crank? Crank, try then stall?
Have you had it plugged into a diagnostic scanner to check if it's a faulty sensor?
Why is there no power to brake lite switch
what car, year,maker ,model
power to switches are fuse blown.
on old cars.
then 2007 to 2010
there is no fuse the BCM body brain runs brake lamps direct
and a small voltage digital signal from the switch
totally differ ways on new cars
is this a trail lamp issue?
tell car and I will show you the brake schematic from the online
FSM book.
4/18/2024 9:21:52 PM •
Cars & Trucks
•
16 views • 0 helpful votes
ECM warning 56 iveco stalis
When the ECM warning light comes on on your Iveco vehicle, the engine usually slows down strongly to a very low speed: in most cases this is due to a problem with the urea pump - adblue, failing to circulate this additive.Click here to know more scegliauto
3/19/2024 7:31:44 AM •
Cars & Trucks
•
24 views • 0 helpful votes
2007 g6 gt 6 cylinder runs great losing power up a incline won't speed up
It could be a number of things it could be a fuel delivery problem check your fuel filter in your fuel pump for clogs or malfunctions it could be ignition system issues faulty spark plugs clogged air filter a dirty air filter can do that also it could also be an exhaust restriction a clock Cadillac converter or exhaust pipe can I meet exhaust flow transmission problems it can also be an engine misfire or a throttle position sensor malfunction or last but not least it could be the vacuum leak you might want to have every bit of that
3/19/2024 2:22:44 AM •
Cars & Trucks
•
24 views • 1 helpful votes
2013 Cherry Tigo 2.0 TXE loose power when driving and come to a standstill. Engine cranked but does not start. What can be the problem
Try to diagnose the issue. That said, a professional mechanic with the diagnostic tools is likely needed.
Restart the Vehicle: First, shut off the engine, wait for about 10 seconds, and then restart the vehicle. Sometimes, this simple reboot can reset any signal errors that might be causing the "reduced engine power" warning light. It's still a good idea to have a mechanic check it out.
Since you've already changed the battery, it's essential to ensure that the new battery is functioning correctly. Check the battery connections, terminals, and cables. Also, inspect the electrical system for any loose or damaged wires.
Fuel System: Verify that there are no fuel-related issues. Ensure that the fuel pump is working correctly, and there are no clogs or leaks in the fuel lines.
Ignition System: The ignition system plays a crucial role in starting the engine. Check the spark plugs, ignition coils, and ignition control module. Faulty components in this system can prevent the engine from starting.
Air Trapped in Cooling System: As suggested in one of the solutions, make sure there's no air trapped in the cooling system. Bleeding the air out can help maintain proper engine temperature and prevent starting issues.
Remember that driving with the "reduced engine power" warning light on is not recommended.
4/23/2024 5:49:51 PM •
Cars & Trucks
•
15 views • 0 helpful votes
On my Fortress 2000 the turn signals not working every thing else works
this is no car it is Mobility scooter , right? electric scooter. tiny.
be does the hazard switch work right or not. test 1
test 2 all fuses good
now working means what?
all 4 or more turn lamps dead.? or stuck on, or some work or not?
only left or right or only front or rear fail?
this answer is for cars, posted to cars. and trucks.
test 3, remove all bulbs and test them 1 by 1, in the car. (lamps can in fact short out)
4/23/2024 11:36:37 AM •
Cars & Trucks
•
15 views • 0 helpful votes
Not finding what you are looking for?