Singer Sewing Machines - Page 5 - Recent Questions, Troubleshooting & Support

check this site out for a mnual Singer_ TINY-TAILOR-TT600-TT600A Manual - Only $5.00 for the ...A Handbook for your Singer_ TINY-TAILOR-TT600-TT600A Sewing Machine ... Download the TINY-TAILOR-TT600-TT600A Singer_ sewing machine manual: ...
http://gotoes.org/sales/Singer_SewingMachineManuals/ViewInfo.pl?Singer_=1&Sewing_Machine_Model=TINY-TAILOR-TT600-TT600A

Need manual for Singer 6236

Always get software from the manufactures web site or their authorised agent.

The model 513 Singer has two gears which operate the feeding mechanism. If one of these gears is broken, the machine will run except the feed dogs will not move. This is a very common problem with this model.

The old timey fix is to put the needle down, swing the fabric 180 and stitch a few stitches in the other direction. It works, but slightly annoying

If your Singer 3116 stitch pattern selector dial is not working, it could be due to a few different issues. Here are some common causes and potential solutions:

1. Dial not fully engaged: Make sure the dial is fully turned to the right until it stops. If it is not fully engaged, the machine will not stitch correctly.
2. Broken stitch dial: If the dial is physically broken or damaged, it may need to be replaced.
3. Loose connection: If the dial is not securely connected to the machine, it may need to be tightened or reattached.
4. Dirt or debris: Sometimes, dirt or debris can build up and interfere with the functioning of the dial. Clean the dial and surrounding area with a soft cloth and see if this resolves the issue.

If these solutions do not resolve the issue, it may be best to take the machine to a professional for repair or seek the advice of Singer customer support.

The meaning of red lights flashing on a device called "Futura" is not clear as I am not aware of any specific device with that name. Can you provide more context or information about this device? It might also be helpful to consult the manufacturer's manual or customer support to determine the meaning of the flashing red lights.

Are you doing free-motion quilting or piecing? The Talent 3321 uses the Singer Low-shank presser feet. If you are doing free-motion quilting, use the darning/embroidery foot. For piecing, use the 1/4" foot. See https://www.singeronline.com/3321talent.html . If you are quilting in straight lines, you might consider the walking foot. The original part numbers are shown in the manual under the Optional accessories on page 9 (page 16 of the PDF). The manual is available on the product page: https://www.singer.com/Talent-3321-Sewing-Machine . The direct link to the manual is currently https://manuals.singer.com/Manuals/RetrievePDF/971 . Other sources with the presser feet in stock are https://www.sewingparts.co.uk/machines/clip-on2/singer-3321.html and https://www.sewingpartsonline.com/singer-3321-sewing-machine-parts.aspx?index=39 . I hope this helps. Cindy Wells

If the needle on your Singer Quilter Confidence machine moves when you're winding the bobbin, it's likely due to a few possible reasons. Here are some steps you can take to resolve this issue:

1. Check the threading: Make sure the thread is properly threaded through the machine, as an incorrect threading can cause the needle to move during bobbin winding.
2. Tighten the needle clamp screw: If the needle clamp screw is loose, it can cause the needle to vibrate during bobbin winding. To tighten the screw, use a screwdriver to turn the screw clockwise.
3. Check the bobbin winder tension: If the bobbin winder tension is too loose, it can cause the needle to move. To adjust the tension, refer to the manual for your Singer Quilter Confidence machine.
4. Check for any obstructions: Make sure there are no obstructions near the needle, such as thread tails, fabric, or lint, as these can cause the needle to move during bobbin winding.

If you've tried all of these steps and the needle continues to move during bobbin winding, it may be a mechanical issue that requires a professional to fix. I would recommend contacting Singer for further assistance.

he error E6 on a Singer Soulmate 5500 sewing machine is typically associated with a threading error. If you have confirmed that the thread is correctly threaded and the bobbin is in good condition, here are a few other things you can try:

1. Check the needle: Make sure the needle is the correct size and type for the fabric you are sewing, and that it is securely inserted into the machine.
2. Check the tension: The tension of the thread may be incorrect. Adjust the tension dial until the thread is feeding through smoothly.
3. Clean the machine: Dirt and debris can build up in the machine over time, causing issues with the threading and operation. Clean the machine thoroughly and make sure the threading path is clear.
4. Check for thread jams: Remove any thread that may be jammed in the machine and clear the path for the thread.

If the pressure bar on your Singer Curvy sewing machine is loose and turning from left to right, it could indicate a problem with the pressure bar mechanism. If the pressure lever is working fine, but the bar is not grabbing when lifted, it could be due to a problem with the tension on the bar or with the mechanism that holds the bar in place. In this situation, it is recommended to take your sewing machine to a certified Singer repair technician

1. Check the threading: Ensure that the upper thread is threaded correctly through the tension and take-up lever, and that the bobbin is inserted correctly in the bobbin case.
2. Adjust the tension: Check the tension on the upper and lower threads. If the tension is too loose or too tight, adjust it according to the instructions in your sewing machine manual.
3. Clean the feed dogs: Make sure that the feed dogs are clean and free of debris. If they are dirty, clean them with a soft brush.
4. Check the needle: Ensure that the needle is inserted correctly and is the correct size and type for the thread and fabric you're using.
5. Inspect the bobbin case: Make sure that the bobbin case is clean and free of debris. If it's dirty, clean it with a soft brush.

If you are looking for the singer 345 instruction manual, you can find it here. The singer 345 is a medium-sized indoor/outdoor loudspeaker that is perfect for large events and public spaces. It features an advanced audio processing and amplification system that makes it capable of producing clear and powerful sound. The singer 345 instruction manual includes detailed instructions on how to set up, operate, and adjust the speaker for optimum performance.

You can't adjust the presser foot force on the 7033. The loose loops indicate the top thread tension is too low. Try re-doing the top thread with the needle and presser foot fully up. Next make sure that the area under the bobbin case is clean. If you are still having an issue, consider a walking foot to keep the fabric layers together. Make sure to get one for a slant shank sewing machine. I hope this helps. Cindy Wells

by a few different things. One possibility is that there is a problem with the power supply or a component that is preventing the machine from starting properly. Another possibility is that there may be an issue with the control board or one of the sensors on the machine that is causing the lights to flash and the machine to produce a noise. I would recommend checking the power supply and cord to make sure that they are properly connected and functioning. You should also check the user manual for troubleshooting steps or contact the manufacturer for further assistance. If the problem persist, it may be best to take the machine to a professional repair shop or contact the manufacturer for further assistance.

The issue you are describing with your Singer 9960 bobbin winder could be caused by a few different things. One possibility is that the clutch is not properly engaging or disengaging. Another possibility is that the bobbin winder belt may be loose or damaged, causing the needle to move up and down and making noise while winding the bobbin. It is also possible that there may be a problem with the bobbin winder mechanism itself. I would recommend checking to make sure the clutch is engaging and disengaging properly, and check the bobbin winder belt and mechanism for any signs of damage or wear. If you continue to experience problems, it may be best to consult the manual or contact the manufacturer for further assistance.

Replacing all the gears on a Touch and Sew Singer Model 638 sewing machine can be a difficult task and should be done by a qualified technician or a sewing machine repair professional. The process of replacing the gears involves taking apart the entire machine, which can be complex and time-consuming. The technician will need to have a working knowledge of the internal mechanics of the machine and access to the proper tools and replacement parts. The process also includes adjusting and aligning the gears after replacement, to ensure proper function of the machine. It's important to note that It could be easier and cheaper to service the machine instead of replacing all the gears, this will depend on the condition of the gears and the technician's assessment. It's recommended that you take your sewing machine to a professional sewing machine repair shop or a authorized Singer service center to have it checked and repaired if necessary.

Do not loosen the screw. The most likely issue is that you didn't get the bobbin case in exactly the right position. Remember you have to get the forked end straddling the bracket. Then twist the bobbin case slightly to the left and back as you push it down lightly. Keep doing this until the edge of the sewing hooks engages in the groove under the rim of the bobbin case. It can take practice to get the bobbin case properly aligned. I hope this helps. Cindy Wells (I have a slightly different Singer model. It still takes three tries to replace the bobbin case at times. It's hard to tell exactly how far to twist and push the unit even when I think it's aligned properly.)

Needle bar height according to the link. https://www.google.com/search?q=Singer+Model+638%2C+needle+skipping+over+thick+seams

Yes, the Singer 4530 should be able to fit into most standard-sized sewing machine cabinets. Make sure to measure the size of your cabinet to ensure the Singer machine and all its accessories will fit inside.