LG Computers & Internet - Page 6 - Answered Questions & Fixed Issues

Hello there:
In order to burn any cd you first need a program to burn with.
roxio is one of the better burning studios that is out their. if your computer is new i would suggest refering to the users manual for further assistance the program may all ready be loaded on the computer. ok?
best regards mike

Verify that you have the last firmware (A14) on the Dell Support web site. Then check the CSS status of the DVD (should be unlocked) with this utility

http://www.digital-digest.com/software/download.php?sid=2&ssid=0&did=1

and finally verify that the DVDs are actually readable, and that the DVD reader works (try reading / burning a data CD-ROM or data DVD).

Check also that the video player software is set to the correct region and there are no errors in the Event Viewer (Hit Start, choose Run, type EVENTVWR.MSC and Enter). DVD events should be either under System or Applications.

DVD REGION FREE & BLUE-RAY REGION FREE To change the Region code on your DVD player, open Control Panel - System - Hardware - Device manager, and click on DVD/CD ROM drives, then right click on the DVD drive and click Properties then click on DVD Region. You can enter a new region and it also shows you how many changes have been made. NOTE you can make only 4 changes and the player will lock permanently on the 4th change. If you want to play DVDs from any region you maybe able to upgrade the firmware to make it region free BUT if you make a mistake or installed the wrong firmware the player will be a piece of junk. The best solution to make the player region free is to install a piece of software (Passkey for DVD) that allows you to play DVDs from any region and Passkey for Blu-ray that allows you to play Blu-rays from any region. There are several available on the Internet but my favourite is DVD-Region Free From: - www.dvdfab.com/products,free.htm

if you are speaking of the dual inverter, I cannot help you. This is not a computer question

Your TV's backlight most likely has reached its end of life cycle (pundido na). Try illuminating the screen with a flashlight (flashlight test) and if you see the picture partially, the led lamp needs replacing.

call around to shops in your area

i don't know. when i have vrouter questions, i call my internet service and talk to techs. they help at no charge.

Hi aubyone

Is this a copy of a game or the original. If you're trying to play off a copy, then the game is 10 to 1 copyprotected. You get this problem when a copy protected game is copied and trying to play it from the copy.

your tv needs some service this problems are not expensive get it to repair shop before this trouble get it worse

old monitor , no PC stated, nor cable used < VGA> test this old monitor on 2nd PC, if fails the monitor is bad. it is 14 years old today, 2005 made all this old are bad the toxic CCFL lamps go bad long ago. best is the recycle center, it and buy only monitors and laptops 2010 or newer, or you get CCFL backlamps again. the monitor this old has near zero street value, and repair costs are huge, nobody puts $1000 saddle on a $5 15 year old horse, The CCFL panel can cost $100 and 1 to 2x that for labor a used monitor is like $40 ,even walfart sells them called refurbs.

no PC stated no OS stated windows is this a desktop or laptop or notepad you posted to computers so......

pieter the manual covers this. hole the menu button in for 15seonds release and unlocked. that is a generic answer. the manual is free to read on online. 1st google hit. and page 8 https://www.manualslib.com/manual/243261/Lg-W1934s-Bn.html?page=8

LG has the current drivers for the L1510SF on their support site as a .ZIP compressed file. Look at https://www.lg.com/uk/support/support-product/lg-L1510SF-SV . Scroll down to the Software & Firmware section. The file can be unzipped by most compression software, including the built-in unzip command in Windows 7 and later. I hope this helps. Cindy Wells

Try using this software, Image Burn. It works for me every time. I gave up on all others. This program will burn ISO's to ISO's, it will burn ISO's to Boot Disks, it will make files into ISO's, it does it all.

Also, just to clear up the term, when you burn a ISO you are generally trying to make a bootable disk, you are not actually burning the ISO, but expanding and burning the files onto a CD or DVD that you will use to install something on another computer.

your DVD Rom drive cannot burn DVDs because it is not a DVD burner, DVD Rom drives are different from DVD writers, if you want to burn DVD you must buy a DVD burner/writer.

Is your SCREEN MUTE on or off?

Para estar mas Seguro de lo que necesitas... Primero connectate con E-bay, o Amazon y pon los datos de LG Flatron. accessories. ^Tienen Chat. y te pueden ayudar . Si no, o si es nuevo, en los folletos de instucciones te derigen.

might be flat laptop battery. Check power plug adapter working and check the dc power plug into laptop is plugged in fully.

https://www.technobezz.com/fix-lg-v20-wi-fi-issues/

Do you have drivers for Win 95 for your device? It should work as a basic monitor. Remember Win 95 driver catalog is very small compared to Win 10. Some monitors on Win 95 needed drivers. Dells did, gateway, etc',