LG Computers & Internet - Page 3 - Answered Questions & Fixed Issues

The Desktop Charger is here http://www.ashop.me/p/1024660/genuine-lg-desktop-battery-charger-for-lgip-580a-battery---bc-1650.html and in other outlets. https://www.google.com/search?q=LG+BC-1650+desktop+battery+charger ..

Several possibilities. Check Bush manual to see if it list compatible formats. All formats are not recognized by all tv's. I am referring to file types. Secondly, check condition of TV ports. Dust may be a problem. Thirdly, TV port may be burnt out. But as you say the drives are recognized, this is more likely your Bush TV does not recognize the file type. You can try converting the file types and see if they then play.

can we have that in English? PBX an old land line telephone switching exchange , really>? why not start a post telling what it is. in clear English. you posted to computers, is it? what computer is it, and OS does it run? what are the symptoms.? snmp is server that manages resources in the system. no system stated, or told. (total) I'd say your system needs service, from local professionals.

Could be a faulty hdd not initializing. Try a new hdd. 500gb is really cheap to buy, you may cosider an upgrade to 1tb perhaps.

This is the best advice and why. https://www.fixya.com/support/r29790007-repairing_own_television ..

use any dvd burning software ... choose option "copy dvd" and after that give the source and destination the same..ie source and destination should be the same..this allows the dvd to make a copy not on the hard disc...and after copying the source dvd, the drive ejects and insert new blank dvd.. and you are done

I think that the power board and the power supply inside of your TV might be bad and it would be more easier and cheaper to buy a new TV than to try and repair the one that you have that is broken.

I think you maybe need to call lg I dont know same problem with me ??

Check the all the cables. Check input settings by using the menu.

Unfortunately, I can't help you with this issue, because I don't understand it at all. My eldest daughter installed CCTV cameras at my home because she is afraid of me because I am supposedly already old. But then she also installed smoke detectors and water leaks, she is afraid that I may leave the water not turned off or the stove, so she installed them. And in the application from this Ajax company, I monitor the security of my home and, in principle, this application is clear to me, although I am not very friendly with technology.

• Larry Ng Jul 15, 2021that is just a YEAR 2007 LCD computer monitor, it needs a computer to work. if it fails in a 2nd PC , if that test fails,the monitor is bad. (hardward failure, monitor. the tests are simple, it fails on 2nd good PC, what can be more simple that test ANY 14 year old monitor on a 2nd good PC. when dead do this.(test2) they are all here when dead again use a FLASH LIGHT. (or in UK a low carbon foot print TORCH)<< joking. https://pcdied.com/monitors_and_screens/... all monitors older than 2010 do this . (has CCFL inside and that is never fun now) the cure is newer monitors 2011 to now called LED monitor.s or OLED. the tubes are cold cathode florescent tubes. (back lamps.) (have 5 classic fail symptoms not just dead) they are short lived, laptops and monitors both back then. 20,00hours on the clock and go bad. bank on it. the 3 failures are CCFL, PSU board, and logic board #1 is CCFL the all died long ago, on average about year 2003 (07 +5= 12, 2012) at 20,000 yours boom dead. or intermittent. PSU is here: https://pcdied.com/monitors_and_screens/... below is logic board. one of the 3 fail, CCFL tubes dead is like 99% we retire them if the CCFL test fails. (using bench PSU to test them) but you have non of that so. upgrade
• Larry Ng Jul 19, 2021 logic board. (CCFL tubes dead, PSU dead, or logic board dead) and or thermally failing , and bad.
• Anonymous Jul 23, 2021 99% of all monitors are all dead. due to those silly low live CCFL back lamps. or the 2cards inside that can fail too. PSU card +HV CCLF power or the Data card is dead. 99.9% of folks seen these facts, upgrade now. high voltage inside 600v on the CCFL pins

Great answers as always Larry. Why don't you ever put them down here where answers go :>)

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Circuit diagrams of many popular brand TVs and other devices are given. You can get details there.

Usually power supply issue or overheating. Take it to an LG Service Centre for diagnostics and repair.

Look here; https://www.youtube.com/results?search_query=lg+x140+disassembly

Hard Reset is the only way. If it was asking for a SIM Lock or PUK Lock, that can only come from your cellular provider. They locked it and only they can unlock. Usually reported stolen :>)

How to unlock LG KC3500 ' sim-unlock.net

sim-unlock.net > simlock > LG > KC3500

How to unlock LG KC3500. How to enter an unlock code in a LG KC3500: First option: 1. Insert a sim card from a different network (for example if the device ...

Unlock LG KC3500 Phone ' Unlock Code - UnlockBase

www.unlockbase.com > unlock-phone > lg > kc3500

If your LG KC3500 comes from MetroPCS USA or T-Mobile USA then it's most likely your Cell Phone is locked with "Device Unlock App" and not asking for a ... Missing: ktf ‎cyon

LG Cyon - Wikipedia

en.wikipedia.org > wiki > LG_Cyon

Cyon is LG Electronics' Korean mobile phone brand. LG established the brand in 1997. Like all other mobile phone brands in Korea, they feature the latest ...

Do you mean the lcd display? Press cntl+alt and the up arrow to reset the screen orientation.

You need to know the old password to change it. If you do not know the password, then there is no way to reset it. You will have to reload the operating system.

Go to settings, support, software update. Make sure that your TV is connected to the internet. There may be a check box for automatic updates, check this for future. Then check update version. The pop up which follows will allow your tv to download and update the firmware. You should be able to install Netflix. ( Also in settings, options, make sure your service country setting is set to your cointry to
USA

1. You connect the second monitor.
2. Once loaded, open the start menu > power then hold shift while pressing the Restart option.
3. It will say please wait. ...
4. Choose Troubleshoot > Start-up Settings and press Restart.
5. When your computer starts up you can choose option 3 which allows you to start the computer in low res video mode.