LG Flatron - Answered Questions & Fixed Issues

After you have the menu displayed, go to Setup (which is the bottommost tab on the vertical panel to the left, represented by a toothed wheel) highlight the first line at the top using auto/set button, and change it using + or - until you find english displayed

ok try this one switch the hard-drive off and on again to restart it and then the screen would come one.

Which IC is equivalent as-- TDA9340PS/N3/A/1923(NXP).

Check the all the cables. Check input settings by using the menu.

Unfortunately, I can't help you with this issue, because I don't understand it at all. My eldest daughter installed CCTV cameras at my home because she is afraid of me because I am supposedly already old. But then she also installed smoke detectors and water leaks, she is afraid that I may leave the water not turned off or the stove, so she installed them. And in the application from this Ajax company, I monitor the security of my home and, in principle, this application is clear to me, although I am not very friendly with technology.

• Larry Ng Jul 15, 2021that is just a YEAR 2007 LCD computer monitor, it needs a computer to work. if it fails in a 2nd PC , if that test fails,the monitor is bad. (hardward failure, monitor. the tests are simple, it fails on 2nd good PC, what can be more simple that test ANY 14 year old monitor on a 2nd good PC. when dead do this.(test2) they are all here when dead again use a FLASH LIGHT. (or in UK a low carbon foot print TORCH)<< joking. https://pcdied.com/monitors_and_screens/... all monitors older than 2010 do this . (has CCFL inside and that is never fun now) the cure is newer monitors 2011 to now called LED monitor.s or OLED. the tubes are cold cathode florescent tubes. (back lamps.) (have 5 classic fail symptoms not just dead) they are short lived, laptops and monitors both back then. 20,00hours on the clock and go bad. bank on it. the 3 failures are CCFL, PSU board, and logic board #1 is CCFL the all died long ago, on average about year 2003 (07 +5= 12, 2012) at 20,000 yours boom dead. or intermittent. PSU is here: https://pcdied.com/monitors_and_screens/... below is logic board. one of the 3 fail, CCFL tubes dead is like 99% we retire them if the CCFL test fails. (using bench PSU to test them) but you have non of that so. upgrade
• Larry Ng Jul 19, 2021 logic board. (CCFL tubes dead, PSU dead, or logic board dead) and or thermally failing , and bad.
• Anonymous Jul 23, 2021 99% of all monitors are all dead. due to those silly low live CCFL back lamps. or the 2cards inside that can fail too. PSU card +HV CCLF power or the Data card is dead. 99.9% of folks seen these facts, upgrade now. high voltage inside 600v on the CCFL pins

Hi. I have got the same problem, and it was very easy to solve. Monitor was LG. The problem was not in the system, it was in the monitor. I just clicked the buttons on the monitor, it was on the wrong setting that divides monitor in two colors, so if it happens to you, try checking your monitor settings, mine was set to "demonstration", half was lighter than the other one, just set it to usual or user. Keep in mind the settings are on the monitor itself, not in the windows (buttons on the monitor itself) Good luck.

There is a button below. Or try youtube.

I don't have space to download anything else I have one application downloaded as Twitter and my phone is full there's something messing with the internal workings of my Android system That's got to be a way to figure this out my battery dies instantly numerous times during the day if I unplug it from the charger it dies Within 4 minutes

You can try starting laptop first and TV after some time or vice versa, tv first.

That's probably a message from the monitor because it's not getting a signal from the computer. Look at the VGA cord where it plugs into the computer, or the monitor to see if you bent pins when reinserting the plug.

Hi, Sounds like an issue of the video card not the monitor. Take to computer shop to verify. One thing you can try is drop the dpi down (refresh rate)a bit. Then try again. If that makes sense to you. Hope that helps.

Hi, have you read the manual? More importantly have you installed the display driver on your machine? LG L1715S Product Support Manuals Warranty More LG

Possibly the monitor itself has a tripped circuit breaker. Look for a reset button. Might be in a pinhole.

What lights are you seeing? Any indicators? What about the power button itself? Any response?

Most likely gone... it would require an electrician to go testing the different components of the monitor inside. And maybe even someone like that cant fix such things.

Go into settings menu and turn of the power saving option.

Hello, It´s not safe to anchor it to the plastic back, monitors usually have a metal frame inside that support the weight of the monitor.

Hello, you need a cable with a headphone jack connector on both ends, one connects to the back of your computer, one to the back of the monitor. Look for it as an AUX CABLE, 3.5mm headphone jack connectors hope this helps. :) Amazon com Anker 3 5mm Premium Auxiliary Audio Cable 4ft 1 2m AUX Cable...