Cellular Innovations Radio Communications - Recent Questions, Troubleshooting & Support

passcodes for bluetooths are almost always either "0000" or "1234"

Instructions

Pair Your Blackberry with a Bluetooth Headset



Turn on Bluetooth headset and Blackberry hand-held.

Enable the Bluetooth radio by going to the options window and clicking on Bluetooth. Click on Enable Bluetooth in that window.

Add your Bluetooth headset to your Blackberry by clicking on Add Device in the Bluetooth window.

Find and select the name of your Bluetooth headset from the list that appears. The Blackberry will search for all Bluetooth devices within range, so other devices might show up on the list.


Click Activate Bluetooth device if you receive a call and the Bluetooth headset does not pick up automatically.



Use your Bluetooth Headset with your Blackberry

Make sure the Bluetooth radio on your Blackberry is turned on before you try to use your Bluetooth headset.

Use the voice-dial feature to call contacts if your headset has that capability. Not all headsets support voice dialing, but more of the newer models do.

Press the on/off button on your headset to end a call or use the end button on the handheld.



Tips & Warnings

Pair your Blackberry with any Bluetooth-enabled device using the same steps as those for connecting a Bluetooth headset.

Remove your Bluetooth headset from the list of paired devices on your Blackberry by selecting and clicking on Delete Device in the Bluetooth window.

Configure your Blackberry to connect to a paired Bluetooth headset without asking for authorization in the Bluetooth Device Properties window. That will allow your headset to automatically reconnect even if you take it out of range temporarily.

Only configure a Bluetooth headset to your Blackberry once. Once you configure the pairing between the two devices, the settings are saved and you do not have to repeat the processes each time you use it.

Turn off the Bluetooth radio on your Blackberry when not in use for security reasons.

Adjust volume on your headset or hand-held to a comfortable level. Excess volume from in-the-ear headsets can cause hearing damage.

you'll have to find out which button triggers the pairing mode. it'll either be the power button itself or the answer call button. hold either one for a few seconds till the light continuously blinks or is static (depending on model) then it'll show up on your phone.

My wireless doest want to connect to my cell phone what do i do?

Call the Places

for iphone : set your phone to scan for wireless device
1 unlock
2 settings icon
3 general
4 bluetooth ON
the hold the big button on the blue tooth once it flashes blue DO NOT LET GO! keep holding it till it flashs red and blue red and blue then let go and it should find it instantly then press on the BK-600 word and enter the 0000 code and you should be all set.

Um, I don't think that there are drivers for a bluetooth headset. It just needs to link (pair) with the other device, meaning the phone. It may be possible to update the firmware, if the headset has a data port (never seen one) and the mfg writes updates (I doubt it)